HARDWARE
05 - Hard ware - Bullivants
05 - Hard ware - Bullivants
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Wire Rope Grips<br />
Wire Rope Grips AS2076: Unit of Measure - Each<br />
Not for lifting applications.<br />
ORDER CODE<br />
Size (mm)<br />
A (mm)<br />
B (mm)<br />
D (mm)<br />
G (mm)<br />
Weight (kg)<br />
160002 8 M8 41 22 8 0.06<br />
Thimbles<br />
Thimbles are used at the ends of wire rope to reinforce the<br />
eye and obviate damage and wear to the wire rope from any<br />
connected lifting tackle or other connection.<br />
Types of Thimbles<br />
Wire Rope Thimbles are made from mild steel and are hot<br />
dipped galvanised with blue paint on the tips in accordance<br />
with AS1138.<br />
Commercial Grade Thimbles are not manufactured to any<br />
standard and are made from light gauge material. Normally<br />
used in light applications and supplied in electro galvanised<br />
finish.<br />
Stainless Steel Thimbles are not manufactured to any<br />
standard and are usually used with stainless steel wire<br />
rope when corrosion could be a cause for concern.<br />
Solid Thimbles are used for loads that are secured by a bolt or<br />
pin and can be drilled (bored) out to match that pin or bolt, refer<br />
to AS1138.<br />
Wire Rope Thimbles - AS1138: Unit of Measure - Each<br />
160003 10 M10 49 27 10 0.12<br />
160004 12 M12 59 32 12 0.21<br />
160010 13-14 M14 70 38 14 0.23<br />
160005 16 M14 77 41 14 0.48<br />
160011 18-19 M16 89 47 16 0.53<br />
160007 22 M20 108 58 20 0.58<br />
05 - <strong>HARDWARE</strong><br />
160008 26 M20 117 61 20 1.12<br />
160012 28 M22 127 66 22 1.41<br />
160013 32 M22 136 70 22 2.07<br />
Other sizes up to 75mm are available upon request.<br />
Commercial Grade Wire Rope Grips:<br />
Unit of Measure - Each<br />
Not for lifting applications.<br />
ORDER CODE<br />
Rope Size<br />
(mm)<br />
ORDER CODE<br />
Rope Size<br />
(mm)<br />
160041 3 160036 12<br />
160029 3/4 160042 14<br />
160030 5 160037 16<br />
160031 6 160043 20<br />
160032 8 160044 22<br />
160035 10 160045 25<br />
Other sizes available.<br />
ORDER CODE<br />
Size (mm)<br />
A (mm)<br />
B (mm)<br />
F (mm)<br />
G (mm)<br />
H (mm)<br />
J (mm)<br />
160315 8 20 31 12 3.6 9 4.4<br />
160316 10 25 38 15 4.5 11 5.5<br />
160317 12 30 46 18 5.4 13 6.6<br />
160333 14 35 54 21 6.3 15 7.7<br />
160318 16 40 61 24 7.2 18 8.8<br />
160319 20 50 76 31 9 22 11<br />
160321 22 55 84 34 9.9 24 12<br />
165054 24 60 92 37 11 26 13<br />
160337 26 65 99 40 12 28 14<br />
160323 28 70 107 43 13 30 15<br />
160324 32 80 122 49 15 35 24<br />
160327 36 90 137 55 17 39 27<br />
Double Throat Grips: Unit of Measure - Each<br />
160340 44 110 168 68 20 48 33<br />
160329 52 130 198 80 24 56 39<br />
ORDER CODE<br />
Rope Dia.<br />
(mm)<br />
Bearing<br />
Surface (mm)<br />
Width (mm)<br />
Dia. of “U”<br />
Bolt (mm)<br />
160009 10/12 40 52 10<br />
160016 16 46 58 10<br />
136<br />
1300 722 999