HARDWARE

Gunnebo ELP Eye Lifting Point Grade 80: Unit of Measure - Each
• Suitable for 1 legged slings
• Eye with flattened section for use with Berglok.
• Forged in Grade 80 material that permits higher WLL
than conventional DIN 580 eyebolts.
• Magnaflux crack tested.
ORDER CODE
WLL (tonnes)
B (mm)
D (mm)
G (mm)
H (mm)
L (mm)
M (mm)
Weight (kg)
Gunnebo
Part No.
164279 1.0** 72 16 42 55 24 M16 0.4 ELP-M16-8
165028 1.5 ** 72 16 42 57 30 M20 0.5 ELP-M20-8
164292 2.0 ** 88 19 48 70 36 M24 0.9 ELP-M24-8
164297 3.0 ** 106 22 60 84 45 M30 1.4 ELP-M30-8
165029 4.0 ** 127 26 72 100 54 M36 2.3 ELP-M36-8
** In case of 1-leg application where loading is limited to straight loading in the
direction of thread (no bending force) it is possible to use ELP with four times
higher WLL
Note: Threaded depths need to be at least 1xM for steel, 1.25 x M for cast iron
and 2 x M for aluminium alloy.
Gunnebo RLP Rotating Lifting Point Grade 10: Unit of Measure - Each
Suitable for applications where a conventional lifting point would not be
fully adequate. Intended to be used as a Lifting Point, Lashing Point or Towing
attachment.
• Dismountable open D-ring. Enables assembly of roundsling, master
link, link or hook directly onto the RLP.
• Hexagon-headed screw for easy assembly/disassembly by means
of ordinary wrench.
• Forged in Grade 10 material permits higher WLL than Grade 8 and
DIN 580 eyebolts.
• For lifting with single or multi-leg slings.
• Safety factor 4:1.
• RLP can rotate 360° and articulate 180°.
• Longer bolt can be supplied on request.
05 - HARDWARE
ORDER CODE
WLL (all directions)
tonnes
WLL (straight lift)
tonnes
Bolt Size (mm)
B (mm)
D (mm)
G (mm)
H (mm)
L (mm)
Weight (kg)
Gunnebo
Part No.
164346** 0.3 0.6 M8 42 12 35 60 15 0.3 RLP M8-10
164349** 0.5 1.0 M10 42 12 34 60 20 0.3 RLP M10-10
164350** 0.75 1.5 M12 57 19 46 85 19 0.9 RLP M12-10
164352** 1.5 3.0 M16 57 19 44 85 24 0.9 RLP M16-10
164354** 2.5 5.0 M20 83 28 56 111 32 2.8 RLP M20-10
164356 3.5 7.0 M24 83 28 53 111 37 2.8 RLP M24-10
165031 6.0 12.0 M30 114 34 69 144 49 7 RLP M30-10
165032 8.0 14.0 M36 114 34 65 144 61 7.3 RLP M36-10
165033 14.0 16.0 M42 149 40 90 185 65 14 RLP M42-10
165034 16.0 20.0 M48 149 40 86 185 75 14.9 RLP M48-10
** Available in UNC thread; 5/16”, 3/8”, 7/16”, 5/8”, 3/4”
WWW.BULLIVANTS.COM 121