HARDWARE
05 - Hard ware - Bullivants
05 - Hard ware - Bullivants
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Crosby 431 Snatch Blocks: Unit of Measure - Each<br />
Crosby M-491 Tower Derrick Hoist Block:<br />
Unit of Measure - Each<br />
05 - <strong>HARDWARE</strong><br />
ORDER CODE<br />
WLL (tonnes)*<br />
Sheave Dia.<br />
(in.)<br />
Bearing Code<br />
Wire Rope<br />
Size (mm)<br />
Weight Each<br />
(kg.)<br />
165366 20 8 BB 26-28 39.5<br />
165367 20 8 RB 26-28 39.5<br />
165368 20 10 BB 26-28 45.8<br />
165369 20 10 RB 26-28 45.8<br />
165370 20 12 BB 26 52<br />
165371 20 12 RB 26 52<br />
165372 20 12 BB 28 52<br />
165373 20 12 RB 28 52<br />
165374 20 14 BB 26 61<br />
165375 20 14 RB 26 61<br />
165376 20 14 BB 28 61<br />
165377 20 14 RB 28 61<br />
165378 25 18 BB 26 118<br />
165379 25 18 RB 26 118<br />
165380 25 18 BB 28 118<br />
165381 25 18 RB 28 118<br />
165382 30 20 BB 28 181<br />
165383 30 20 RB 28 181<br />
165384 30 20 BB 32 181<br />
165385 30 20 RB 32 181<br />
165386 30 24 BB 28 215<br />
165387 30 24 RB 28 215<br />
165388 30 24 BB 32 215<br />
165389 30 24 RB 32 215<br />
• A wide variety of configurations:<br />
• 4, 8, 12 or 15 metric ton capacity<br />
• 10mm to 25mm wire line sizes<br />
• Painted or Galvanized finish<br />
• 203mm and 254mm blocks furnished with dual rated<br />
wireline sheaves.<br />
• Forged steel swivels, tees, yokes and shackles are<br />
Quenched & Tempered.<br />
• Sheave lubrication through center pin for easy maintenance.<br />
• Design factor of 4 to 1<br />
• All blocks 356mm and larger are furnished with McKissick ®<br />
Roll Forged sheaves with fl ame hardened grooves.<br />
• Recessed sideplate design reduces the gap between the<br />
sheave rim and the sideplate, allowing the sheave assembly<br />
to be captured in the block if loss of center pin occurs.<br />
• Sealed tapered roller bearings extend the life of the center<br />
pin and bearings, and allows for faster line speeds than<br />
recommended with standard snatch blocks.<br />
• Shackle fitting swivels for easy positioning.<br />
• Suitable for hoisting personnel, contingent upon all<br />
employees, including the winch operator, being trained to<br />
follow any applicable Federal, local and industry standards.<br />
• Tugger/Derrick applications: API RP54<br />
• Tower applications: OSHA directive CPL 2-1.36<br />
• Holes through side plates are available for secondary block<br />
securement device.<br />
• Manufactured by an API Q1 Certified facility<br />
• Type Approval and certification in accordance with<br />
ABS 2006 Steel Vessel Rules 1-1-17.7, and ABS Guide<br />
for Certifi cation of Cranes.<br />
• All sizes are RFID EQUIPPED.<br />
ORDER CODE<br />
WLL (tonnes)*<br />
Sheave Dia.<br />
(mm)<br />
Wire Rope<br />
Size (mm)<br />
Weight Each<br />
(kg.)<br />
165407 4 203 10 - 13 16<br />
165390 8 254 10 - 13 25<br />
165391 8 254 13 - 14 25<br />
165392 12 254 13 - 14 25<br />
165393 12 356 16 43<br />
165394 12 356 19 43<br />
165395 15 406 22 68<br />
165396 15 406 25 48<br />
*Ultimate Load is 4 times the Working Load Limit<br />
146<br />
1300 722 999