Masterpact NT and NW

More documents

Recommendations

Info

Functions and characteristics Masterpact communication RSU and RCU utilities PB104805 PB104806 DB118723 Two utilities, RSU and RCU, are available to assist in starting up a communicating installation. They can be downloaded from the Schneider Electric internet site and include a "Live update" function that enables immediate updating. RSU: Micrologic Remote Setting Utility. RSU (Remote Setting Utility) This utility is used to set the protection functions and alarms for each Masterpact and Compact NSX device. After connection to the network and entry of the circuit-breaker Modbus address, the software automatically detects the type of trip unit installed. There are two possible operating modes. Off-line with the software disconnected from the communication network For each selected circuit breaker, the user can do the following. Determine the protection settings The settings are carried out on a screen that shows the front of the trip unit. The Micrologic setting dials, keypad and screen are simulated for easy use of all Micrologic setting functions. Save and duplicate the protection settings Each configuration created can be saved for subsequent device programming. It can also be duplicated and used as the basis for programming another circuit breaker. On-line with the software connected to the network Similarly, for each selected circuit breaker, the user can do the following. Display the current settings The software displays the trip unit and provides access to all settings. View the corresponding protection curves A graphic curve module in the software displays the protection curve corresponding to the settings. It is possible to lay a second curve over the first for discrimination studies. Modify settings in a secure manner b There are different levels of security: v password: by default, it is the same for all devices, but can be differentiated for each device v locking of the Modbus interface module which must be unlocked before the corresponding device can be set remotely v maximum settings limited by the positions of the two dials on the trip unit. These dials, set by the user, determine the maximum settings that can be made via the communication system. b Settings are modified by: v either direct, on-line setting of the protection settings on the screen v or by loading the settings prepared in off-line mode. This is possible only if the positions of the dials allow the new settings. All manual settings made subsequently on the device have priority. Program alarms b Up to 12 alarms can be linked to measurements or events. b two alarms are predefined and activated automatically: v Micrologic 5: overload (Ir) v Micrologic 6: overload (Ir) and ground fault (Ig) b thresholds, priorities and time delays can be set for 10 other alarms. They may be selected from a list of 91 alarms Set the outputs of the SDx relays This is required when the user wants to change the standard configuration and assign different signals to the 2 outputs of the SDx relay. RCU (Remote Control Utility) The RCU utility can be used to test communication for all the devices connected to the Modbus network. It is designed for use with Masterpact, Compact NSX, Advantys OTB and Power Meter devices. It offers a number of functions. Mini supervisor b Display of I, U, f, P, E and THD measurements for each device, via navigation. b Display of ON/OFF status. Open and close commands for each device A common or individual password must first be entered. When all functions have been tested, this utility is replaced by the supervision software selected for the installation. RCU: Remote Control Utility for communication tests. A-36 version: 10.1 207E2300.indd
Supervision software Schneider Electric electrical installation supervision, management and expert system software integrates Masterpact, Compact and Compact NSX identification modules. Types of software Masterpact, Compact and Compact NSX communication functions are designed to interface with software dedicated to electrical installations: b switchboard supervision b electrical installation supervision b power system management: electrical engineering expert systems b process control b SCADA (Supervisory Control & Data Acquisition), EMS (Enterprise Management System) or BMS (Building Management System) type software. PE86181r-25 PB104859 EGX300 Schneider Electric solutions Electrical switchboard supervision via EGX300 Web servers A simple solution for customers who want to consult the main electrical parameters of switchboard devices without dedicated software. Up to 16 switchboard devices are connected via Modbus interfaces to an EGX300 Ethernet gateway integrating the functions of a web page server. The embedded Web pages can be easily configured with just a few mouse clicks. The information they provide is updated in real time. The Web pages can be consulted using a standard Web browser on a PC connected via Ethernet to the company Intranet or remotely via a modem. Automatic notification of alarms and threshold overruns is possible via e-mail or SMS (Short Message Service). Electrical installation supervision via iRIO RTU The iRIO RTU(remote terminal unit) can be used as Ethernet coupler for the PowerLogic System devices and for any other communicating devices operating under Modbus RS485 protocol. Data is viewable via a standard web browser. PB104807_68 iRIO RTU ION-E ION-E electrical engineering expert system software ION-E is a family of web-enabled software products for high-end power-monitoring applications. It is designed for large power systems. ION-E offer detailed analysis of electrical events, long-duration data logging and extensive, economical report-building capabilities (e.g. consumption monitoring and tariff management). A wide variety of screens can be displayed in real time, including more than 50 tables, analogue meters, bargraphs, alarms logs with links to display waveforms and predefined reports on energy quality and service costs. Other software Masterpact, Compact and Compact NSX devices can forward their measurement and operating information to special software integrating the electrical installation and other technical facilities: b SCADA process control software: Vijeo CITECT b BMS Building Management System software: Vista. Please consult us. 207E2300.indd version: 10.1 A-37
Page 1: Low voltage Masterpact NT and NW LV
Page 4 and 5: Covering all your applications Mast
Page 6 and 7: Optimised volumes and ease of insta
Page 8 and 9: Monitoring and protecting your low
Page 10 and 11: VIII version: 7.4 207E1100.indd
Page 12 and 13: menu long time short time alarm Pre
Page 14 and 15: Technical collection Technical coll
Page 16 and 17: menu long time short time alarm Fun
Page 18 and 19: Functions and characteristics Circu
Page 24 and 25: Functions and characteristics Micro
Page 36 and 37: Functions and characteristics Power
Page 38 and 39: Functions and characteristics Opera
Page 40 and 41: Functions and characteristics Switc
Page 44 and 45: Functions and characteristics Porta
Page 46 and 47: Functions and characteristics Commu
Page 48 and 49: Functions and characteristics Maste
Page 54 and 55: Functions and characteristics Conne
Page 56 and 57: Functions and characteristics Conne
Page 58 and 59: Functions and characteristics Locki
Page 60 and 61: Functions and characteristics Indic
Page 62 and 63: Functions and characteristics Remot
Page 64 and 65: Functions and characteristics Remot
Page 66 and 67: Functions and characteristics Sourc
Page 74 and 75: Functions and characteristics Earth
Page 76 and 77: Functions and characteristics Earth
Page 78 and 79: Installation recommendations Operat
Page 80 and 81: Installation recommendations Instal
Page 82 and 83: Installation recommendations Door i
Page 84 and 85: Installation recommendations Power
Page 86 and 87: Installation recommendations Recomm
Page 88 and 89: Installation recommendations Busbar
Page 90 and 91: Installation recommendations Temper
Page 92 and 93: Installation recommendations Derati
Page 98 and 99: Installation recommendations Substi
Page 100 and 101:
TOOLS schneider-electric.com CAD so
Page 102 and 103:
Dimensions and connection NT06 to N
Page 104 and 105:
Page 106 and 107:
Page 108 and 109:
Page 110 and 111:
Dimensions and connection NW08 to N
Page 112 and 113:
Dimensions and connection NW08 to N
Page 114 and 115:
Dimensions and connection NW40 circ
Page 116 and 117:
Dimensions and connection NW40 circ
Page 118 and 119:
Dimensions and connection NW40b to
Page 120 and 121:
Dimensions and connection NW40b to
Page 122 and 123:
Dimensions and connection NT/NW acc
Page 124 and 125:
Dimensions and connection NT/NW ext
Page 126 and 127:
Dimensions and connection NT/NW ext
Page 128 and 129:
TOOLS schneider-electric.com Traini
Page 130 and 131:
Electrical diagrams Masterpact NT06
Page 132 and 133:
Electrical diagrams Masterpact NW08
Page 134 and 135:
Electrical diagrams Masterpact NT a
Page 136 and 137:
40% Mode OK 100% 40% Electrical dia
Page 138 and 139:
menu 1 0 % menu 1 0 % Electrical di
Page 140 and 141:
Electrical diagrams Masterpact NT a
Page 142 and 143:
Additional characteristics Tripping
Page 144 and 145:
Additional characteristics Limitati
Page 146 and 147:
TOOLS schneider-electric.com The el
Page 148 and 149:
Catalogue numbers Retrofit solution
Page 150 and 151:
Catalogue numbers: spare parts Mast
Page 152 and 153:
Page 154 and 155:
Page 156 and 157:
Page 158 and 159:
Page 160 and 161:
Page 162 and 163:
Page 164 and 165:
Page 166 and 167:
Page 168 and 169:
Page 170:
Order form Masterpact NT and NW To
show all

Masterpact NT and NW

Create successful ePaper yourself

Delete template?

Save as template?