Guide

Recommendations

Info

Table 1: Parameter Default Values Menu Parameter TigerStop TigerFence/ TigerCrossCut TigerTurbo Heavy Duty 2 TigerRack Options Menu Part List Menu Backoff 0.000 Retract 0.000 Retract Offset Retract Type Head Cut Tail Cut Outfeed Load Offset Unload Max SPL Waste Pre-Sets Drop Box Salvage 0.000 Standard 2.000in 2.000in 0.000in 0.000in 0.000in 178.000in Last Set Point 2.000in 2.000in Opt Score 2.000 Opt Time 2000ms Opt Pen 1.000 Clamp 1 Clamp 2 Swing Clamp Download Style Infinite PET Banana 1 5.000in -5.000in 20.000in Pri-Global No 0.000in 24.000in Banana 2 36.000 Drill Mode No 9
Table 1: Parameter Default Values Menu Parameter TigerStop TigerFence/ TigerCrossCut TigerTurbo Heavy Duty 2 TigerRack Part List Menu Group Count Tiger Measure TM Offset Quantity HC Jog Width Cal Width Scale Panel Min Panel Max MM Only 0 Off 18.000in Standard Depends on User Need Depends on User Need Depends on User Need Depends on User Need Depends on User Need Depends on User Need 10
Page 1: Made In America 2015 TigerStop, LLC
Page 4 and 5: DANGER: This machine can start, mov
Page 6 and 7: The Home Routine When TigerStop is
Page 8 and 9: Basic Functions TigerStop has a few
Page 10 and 11: 3.Enter the number of the preset yo
Page 12 and 13: Menu The menu button is the gateway
Page 16 and 17: Table 1: Parameter Default Values M
Page 18 and 19: Table 1: Parameter Default Values M
Page 20 and 21: Note: It is important to re-measure
Page 22 and 23: 2.TigerStop will tell you that the
Page 24 and 25: Options Menu The options menu house
Page 26 and 27: Print Cut The print cut setting tel
Page 28 and 29: pattern parts lists. It also applie
Page 30 and 31: To change Load Offset... 1. Enter t
Page 32 and 33: Note: Take care when changing Opt S
Page 34 and 35: Banana 1 Banana 1 is a global param
Page 36 and 37: WidthCal WidthCal is used with Tige
Page 38 and 39: To change Out Acceleration... 1. En
Page 40 and 41: Note: Throttle LVM is a hidden sett
Page 42 and 43: Timer Menu The timer menu houses al
Page 44 and 45: 2. Enter the new Clamp Off Delay va
Page 46 and 47: Set Tool Interconnect Kit Set tool
Page 48 and 49: Laser Menu The laser menu houses al
Page 50 and 51: Crayon Crayon turns the TigerSaw 10
Page 52 and 53: Debug Menu The debug menu houses va
Page 54 and 55: Lists The list function is TigerSto
Page 56 and 57: Running a Pusher List 1.At the read
Page 58 and 59: 4.If you have the TigerStop optimiz
Page 60 and 61: Once the stock material is loaded,
Page 62 and 63: Editing a List 1.At the ready scree
Page 64 and 65:
A Auto Detect 16 Auto Setup 15 Auto
Page 67:
FIND US ONLINE AT www.tigerstop.com
show all

Guide

Create successful ePaper yourself

Delete template?

Save as template?