INSTRUCTION GUIDE SHIV

THIS INSTRUCTION GUIDE CONTAINS IMPORTANT INFORMATION.
PLEASE READ CAREFULLY AND STORE IN A SAFE PLACE.
TABLE OF CONTENTS
INTRODUCTION............................................................................................................................. 1
TOOLS REQUIRED.......................................................................................................................... 1
FRAME PREPARATION.................................................................................................................. 2
FORK PREPARATION.................................................................................................................... 2
SEATPOST PREPARATION............................................................................................................ 2
SUPPLEMENTAL DOCUMENTATION.............................................................................................. 2
WARRANTY.................................................................................................................................. 2
GEOMETRY................................................................................................................................... 3
HARDWARE.................................................................................................................................. 4
CHAPTER 1: FORK / STEM / HANDLEBAR INSTALLATION.............................................................. 5
1. INSTALLING THE FORK INTO THE STEERER TUBE...................................................................5
2. INSTALLING THE CARBON AERO HANDLEBAR ON THE AERO STEM..............................6
3. INSTALLING THE ALLOY HANDLEBAR WITH A STANDARD 31.8MM STEM...................... 7
4. INSTALLING THE EXPANDER PLUG AND TOP CAP.................................................................. 7
CHAPTER 2: HANDLEBAR EXTENSION / RISER INSTALLATION......................................................8
1. INSTALLING THE EXTENSION RISERS..........................................................................................8
SYSTEM WITH NO RISER SPACERS:..................................................................................................9
SYSTEM WITH RISER SPACERS:.........................................................................................................9
2. INSTALLING THE CLAMPS, EXTENSIONS AND ARM PADS................................................. 10
3. ADJUSTING THE EXTENSIONS AND ARM PADS...................................................................... 11
CHAPTER 3: CABLE HOUSING / WIRE INSTALLATION.................................................................. 12
1. INSTALLING THE BRAKE CABLE HOUSINGS AND SHIFTER WIRES................................. 12
2. ROUTING THE DERAILLEUR CABLES / WIRES AT THE BOTTOM BRACKET................. 14
3. Di2 WIRING LOCATIONS................................................................................................................. 14
4. INSTALLING THE CABLE ROUTING COVER PLATE................................................................ 15
5. INSTALLING THE CABLE ROUTING CONTROL TOWER........................................................ 15
CHAPTER 4: BRAKE INSTALLATION............................................................................................. 16
1. FRONT AND REAR BRAKE ASSEMBLY (Exploded view)......................................................... 16
2. INSTALLING THE FRONT BRAKE ASSEMBLY...........................................................................17
3. INSTALLING THE REAR BRAKE ASSEMBLY............................................................................ 18
4. ADJUSTING THE FRONT AND REAR BRAKE ASSEMBLIES................................................ 19
CHAPTER 5: SEATPOST INSTALLATION...................................................................................... 20
1. INSTALLING AND ADJUSTING THE SHIV SEATPOST............................................................. 20
2. SEATPOST SETBACK OPTIONS................................................................................................... 21
CHAPTER 6: FUELSELAGE INSTALLATION.................................................................................. 22
1. INSTALLING THE FUELSELAGE ................................................................................................... 22
SPECIALIZED BICYCLE COMPONENTS
15130 Concord Circle, Morgan Hill, CA 95037 (408) 779-6229
0000051673_IG_R1, 04/2015
Please note all instructions and notices are subject to change and updates without notice.
Please visit www.specialized.com for periodic tech updates.
Feedback: techdocs@specialized.com