Getting Started Guide
fc7-getting-started-guide
fc7-getting-started-guide
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Example 1: LED flasher<br />
In this example we will create an LED<br />
flasher which will introduce you to<br />
the most basic Flowcode features.<br />
This will run in simulation and can be<br />
downloaded to hardware.<br />
To make an LED flasher we will simply<br />
turn the LED on and off, repeatedly.<br />
Since we are using a template<br />
we already have an LED on our<br />
simulation panel on our EB083<br />
board. Ensure that the configuration<br />
properties are as seen below. We<br />
will be using rhe LED connected to<br />
PORTA.0.<br />
<strong>Getting</strong> <strong>Started</strong><br />
<strong>Guide</strong><br />
Copyright © 2016 Matrix Technology Solutions Ltd.<br />
11