Getting Started Guide

Recommendations

Info

Getting Started Guide 2. Orientation axes The 3-axes in the top left corner of the simulation panel allow you to align the camera back to an axis. 4. Save camera With the ‘save camera’ button you can save and load custom camera angles to allow you to swap between your custom positions. 3. Tools In this tool box you can adjust the configuration properties of the simulation panel; change background colour, snap to grid, lighting modes and more. Copyright © 2016 Matrix Technology Solutions Ltd. 8
Getting Started Guide Section 2: Flowcode Examples We will now run through several examples; LED flasher, creating a latch and finally the use of an LCD screen to create a counter. Each will increase in complexity and at the same time reduce in provided information, requiring you to remember what you’ve learnt in previous examples. Copyright © 2016 Matrix Technology Solutions Ltd. 9
Page 1 and 2: Getting Started Guide
Page 3 and 4: Getting Started Guide Section 1: Th
Page 5 and 6: If you are using the EB006; 1. Sele
Page 7: The simulation panels In this next
Page 11 and 12: Example 1: LED flasher In this exam
Page 13 and 14: Getting Started Guide With our whil
Page 15 and 16: Getting Started Guide Our final ste
Page 17 and 18: Getting Started Guide The simple LE
Page 19 and 20: 2. Arduino hardware If you are usin
Page 21 and 22: Getting Started Guide With your app
Page 23 and 24: Getting Started Guide The ‘Edit v
Page 25 and 26: Getting Started Guide With the valu
Page 27 and 28: Example 3: LCD screen and counter I
Page 29 and 30: Getting Started Guide Once opened y
Page 31 and 32: Getting Started Guide We have now i
Page 33: Matrix Technology Solutions Limited

Getting Started Guide

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?