Michel Selig II
The Construction of The Classic Six Metre Model Yacht Michel Selig II
The Construction of The Classic Six Metre Model Yacht Michel Selig II
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
were necessary. According to the need, some were placed<br />
outside the hull and others inside the hull.<br />
The narrower width of the top lift, with respect to the two<br />
below, makes it impossible to place the clamps directly on it.<br />
The solution is to use a "bridge" which spans the top lift and<br />
then to put the clamps on the bridge.<br />
Fulll upper hull being glued. The bottom ends of the clamps<br />
are shown in the following photo
Change language