reece 101 service
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
S-<strong>101</strong><br />
MODEL <strong>101</strong> - OPERATING INSTRUCTIONS<br />
Provision is made on this machine to meet any emergency arising during the making of the buttonhole.<br />
To extract work in case of unthreading or mislocation:<br />
Proceed as follows: 1. Press pedal on transmitter to stop belts.<br />
2. Pull lever in direction of arrow toward operator.<br />
3. Turn R. H. handwheel (knurled rim) in direction of arrow until locked.<br />
4. Move clamp lever away from operator to release work - and<br />
withdraw it.<br />
5. Pull clamp lever down again in direction of operator.<br />
6. Press pedal - the machine will now complete its cycle and return to its<br />
starting position without sewing.<br />
A complete cycle under power, including the<br />
cutting operation - may be made without<br />
sewing.<br />
Lift up the lever and hold - depress the<br />
starting lever and let go of lever after the<br />
machine has travelled a short distance - the<br />
machine will thereafter complete its cycle and<br />
cut fabric without stitching. It can be stopped in<br />
any desired position with the transmitter pedal.<br />
1-8<br />
Revised 09/2004<br />
e-mail: <strong>service</strong>@amf<strong>reece</strong>.cz; parts@amf<strong>reece</strong>.cz; website: www.amf<strong>reece</strong>.com<br />
Phones: +420 582 309 146+ (Service), +420 582 309 286 (Spare Parts); Fax: +420 582 360 606