EN metal working machinery

Custom accessories
XXNumeric CNC control Cybelec DNC 880S with
graphical support and offline PC software
XXCNC-controlled, motorised R axis
XXCNC-controlled, motorised table crowing to
compensate for bending of top beam and table
XXExtension of X axis travel range to 1000 mm
XXAdditional rear stop fingers and sheet support
arms
XXTable groove of 12.7 x 15.8 mm
for LVD type plug-in dies
XXExtension of stand reach
XXQuick release top tool TEDA type for vertical
removal of the top tools
XXParking position for support arms
XXIndividual punches and dies
XXControl on left side of machine
Option
Magnetic drilling
Deburring
··
Motorised R axis option
Metal grinding
Presses
Bending
Notching & punching
Cutting
CNC control DT-10 (standard)
The products are drawn on the graphical 2D control,
DT-10 with touchscreen – after completing the drawing,
the control computes the bending sequences and the
matching axis positions
XXY1, Y2 and X axes and the optional R axis with
motorised crowning are supported
XX10.1" TFT LCD screen with capacitive touch surface
XXComputation of the following functions: bending
sequence, stretched length, immersion depth,
changeover point, clamping point, compression force,
crowning
XXBending tools, top beam, table and stop fingers can
be freely drawn for optimum collision monitoring
XXBending sequence simulation
XXUSB interface for backing up data
(A) Bending length
(B) Distance between columns
(C) Stroke
(D) Installation height
(E) Reach depth
(F) Table height
(G) Table width
(H) Height
(L) Length
(W) Depth
Circular saws
Roller conveyors
145
Band saws