EN metal working machinery
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
The control panel on our H models<br />
Function of our H models:<br />
The Version H saws have a hydraulic cylinder that<br />
controls lowering of the saw arm. The operator<br />
can switch between manual mode and gravity<br />
mode with a selector switch. In manual mode,<br />
the sawing arm is lowered by hand. In gravity<br />
mode, the sawing action is started by pressing a<br />
pushbutton; the saw arm is lowered through its<br />
own weight; the lowering speed can be regulated<br />
using a choke valve under the control panel.<br />
The cut is executed at the selected band speed,<br />
and the saw band stops automatically after<br />
completing the cutting action. The saw arm is<br />
always lifted manually. The lowering cylinder<br />
automatically shuts off on reaching the top end<br />
position.<br />
Magnetic drills<br />
Deburring<br />
Standard<br />
XXCheck lamp for saw band tension<br />
and indicator lamp:<br />
X X- lit green when the band tension is correct and the<br />
saw band cover is closed<br />
XXSwitch for selecting the band speed in 2 stages,<br />
e.g.: Position 1: 35 m/min., Position 2: 70 m/min.<br />
XXThis switch is the main switch at the same time<br />
Metal grinding<br />
XXStart of cycle - pressing the button starts<br />
the sawing action.<br />
XXSwitch for switching the mode<br />
Work mode switches between manual and<br />
gravity mode (lowering of the saw arm<br />
through its own weight)<br />
XXIndicator lamp shows whether the<br />
machine is switched on at the main<br />
switch<br />
XXEmergency off switch - switches the<br />
machine off during a cycle<br />
Cutting<br />
Notching & punching<br />
BMBS 360 x 500 H-DG<br />
Presses<br />
Bending<br />
XXSwitch for selecting the<br />
belt speed in<br />
2 stages, e.g.,:<br />
X XPosition 1: 35 m/min.<br />
Position 2: 70 m/min.<br />
XXCheck lamp for saw band tension<br />
X X- lit green when the band tension is<br />
correct and the saw band cover is closed<br />
XXStart of cycle - pressing<br />
the button starts the<br />
sawing action.<br />
XXRESET button<br />
XXEmergency off switch -<br />
switches the machine off<br />
during a cycle<br />
XXIndicator lamp shows<br />
whether the machine is<br />
switched on at the main<br />
switch<br />
XXStop switch - switches<br />
the machine off during<br />
a cycle<br />
Circular saws<br />
Roller conveyors<br />
205<br />
Band saws