EN metal working machinery

Hydraulic swing cut guillotine shears
HTBS-T - Hydraulically NC-controlled guillotine shears, heavy-duty type
Standard type
XXVery heavy welded steel design
XXLow cutting angle for optimum results
XXMotorised rear stop 1000 mm
XXRear stop driven via play-free ball screws,
guided on linear rails
XXRear stop easily positioned via NC controller
D-Touch 7
XXDivided fold-up finger protection grille,
1000 mm
XXErgonomically arranged, pivoting control panel
XXOperated via mobile foot switch with
emergency stop switch
XXManual cutting kerf adjustment via lever with
scale on right side of machine
XXRear stop area safeguarded by light barrier
XXLighting with cutting line display as silhouette
XXHold-down unit arranged close to cutting edge
XXEasy handling of sheet metal via ball transfer
units in table
XXOne angle stop 1500 mm and two sheet
support arms 1000 mm (three sheet support
arms for machines as of 4 m)
XXPremium knife, suitable for cutting
stainless steel
XXPremium components by Bosch, Rexroth,
Hydac, Siemens, Telemecanique
HTBS-T 3100-100
Hydraulic guillotine shears
Model HTBS-T 3100-60 3100-100 3100-130 3100-160 3100-200 4100-60 4100-130
Art. no. 3825306 3825310 3825313 3825316 3825320 3825406 3825413
Technical specifications
Cutting length (A) 3100 mm 3100 mm 3100 mm 3100 mm 3100 mm 4100 mm 4100 mm
Cutting performance (450 N/mm²) 6 mm 10 mm 13 mm 16 mm 20 mm 6 mm 13 mm
Cutting performance (700 N/mm²) 4 mm 6 mm 8 mm 10 mm 13 mm 4 mm 8 mm
Stand reach (D) 50 mm 50 mm 50 mm 50 mm 50 mm 50 mm 50 mm
max. strokes per minute for
15 13 13 10 6 12 8
full cutting length
Cutting angle 1.30° 1.30° 1.45° 2° 2° 1.30° 1.45°
Cutting kerf adjustment min. 0.05 mm 0.05 mm 0.05 mm 0.07 mm 0.09 mm 0.05 mm 0.05 mm
Cutting kerf adjustment max. 0.75 mm 1.05 mm 1.45 mm 1.80 mm 2.20 mm 0.75 mm 1.45 mm
Table height (C) 865 mm 865 mm 845 mm 818 mm 886 mm 865 mm 818 mm
Table depth (B) 500 mm 580 mm 600 mm 550 mm 570 mm 580 mm 550 mm
Table length (R) 3515 mm 3515 mm 3550 mm 3580 mm 3670 mm 4510 mm 4620 mm
Number of hold-down units 16 16 16 14 14 20 18
Hold-down unit pressure 14 t 22 t 37 t 61 t 77 t 17 t 62 t
Rear stop adjustment range 1000 mm 1000 mm 1000 mm 1000 mm 1000 mm 1000 mm 1000 mm
Motor output rear stop 0.75 kW 0.75 kW 0.75 kW 0.75 kW 0.75 kW 0.75 kW 0.75 kW
Rear stop speed 120 mm/sec. 120 mm/sec. 120 mm/sec. 120 mm/sec. 120 mm/sec. 120 mm/sec. 120 mm/sec.
Drive output 15 kW 22 kW 30 kW 37 kW 45 kW 15 kW 30 kW
Electrical connections 400 V/50 Hz 400 V/50 Hz 400 V/50 Hz 400 V/50 Hz 400 V/50 Hz 400 V/50 Hz 400 V/50 Hz
Oil tank capacity 200 l 200 l 330 l 410 l 450 l 200 l 330 l
Number of support brackets 2 2 2 2 2 3 3
Length (L) 4110 mm 4200 mm 4280 mm 4550 mm 4450 mm 5230 mm 5350 mm
Depth (W1) 2200 mm 2250 mm 2300 mm 2250 mm 2260 mm 2300 mm 2250 mm
Overall depth (W) 3700 mm 3600 mm 3600 mm 3825 mm 3400 mm 3600 mm 3850 mm
Height (H) 2100 mm 2100 mm 2350 mm 2250 mm 2450 mm 2150 mm 2250 mm
Weight 7650 kg 9300 kg 12500 kg 15000 kg 21700 kg 11750 kg 16300 kg
All hydraulic guillotine shears are supplied with oil.
64