EN metal working machinery

Saw bands
M42 Sprint saw bands
The section expert for small to medium wall thicknesses
Dimensions Variable tooth groups
mm 3/4 4/6 5/8 6/10 8/12 10/14
13 x 0.65 K K K K
13 x 0.90 K K K
20 x 0.90 K K K K K
27 x 0.90 K K K K K K
34 x 1.10 K K K K K K
41 x 1.30 K K K K
54 x 1.60 K K K
K = combined tooth
The combined with a 0° rake angle in combination with the group set will
cut thin-walled sections with little vibration. Short-chipping material is
processed with ease. The M42-SPRINT bi-metal saw band improves the
service life and achieves good cutting quality.
The specialist for:
popular steel grades up to approx. 1400 N/mm² tensile strength
NE sections
Individual and bundle cuts
Sections with low or medium wall thickness
Steel sheets on vertical plate sawing systems
M42 Sprint Plus saw bands
Powerful for materials with medium to large dimensions
Dimensions
Variable tooth groups
mm 0.75/1.25 1.4/2 2/3 3/4 4/6
20 x 0.90 K
27 x 0.90 K K K
34 x 1.10 K K K K
41 x 1.30 K K K K
54 x 1.30 K K K K
54 x 1.60 K K K K
67 x 1.60 K K K
80 x 1.60 K K
K = combined tooth
M42 Sprint-Medium-VS saw bands
The multifunctional talent for many cutting tasks
Dimensions
Variable tooth groups
mm 2/3 3/4 4/6 5/7 8/11
27 x 0.90 K K K K
34 x 1.10 K K K K
41 x 1.30 K K K
54 x 1.30 K
54 x 1.60 K K K
67 x 1.60 K K
K = reinforce combined tooth
The combined tooth with a positive rake angle in combination with the
group set will cut solid material and thick-walled sections with little
vibration, while improving the cutting performance and achieving a
smooth surface.
The specialist for:
popular steel grades up to approx. 1400 N/mm² tensile strength
NE sections
Individual and bundle cuts
Medium to large sized workpieces
Thick-walled sections
The new reinforced HL combined tooth with a positive rake angle
in combination with the group set will cut solid material and thickwalled
sections with very little vibration, while improving the cutting
performance, achieving a smooth surface and an impressive service life.
The specialist for:
small to medium-sized swivel frame machines
popular steel grades up to approx. 1400 N/mm² tensile strength
Individual and bundle cuts
Sections and beams
Solid material
M51 Sprint-Plus saw bands
Extra wear resistant teeth for steels and alloys of medium dimensions
Dimensions
Variable tooth groups
mm 1.4/2 2/3 3/4 4/6
27 x 0.90 K K K
34 x 1.10 K K K
41 x 1.30 K K
54 x 1.60 K K
67 x 1.60 K K
K = combined tooth
The combined with an extremely positive rake angle in combination with
the group set will cut thin-walled sections with little vibration. Tooth
tips made of HSS M 51 additionally improve the band service life, in
particular for problematic materials.
The specialist for:
popular steel grades up to approx. 1700 N/mm² tensile strength
Corrosion and acid-resistant steels
Nickel based alloys
Titanium and special bronzes
Solid material medium dimensions
Thick-walled sections
282