vishnu-era-14
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
ISSUE <strong>14</strong> JANUARY 2017<br />
Internet of Things using<br />
Arduino and Raspberry Pi<br />
Catia toolbox for emerging<br />
Industrial applications<br />
The Department of Mechanical Engineering of Shri<br />
Vishnu Engineering College for Women organized a<br />
one-week student training program on “CATIA<br />
Toolbox for Emerging Industrial Applications” under<br />
TEQIP-II from 7th to 13th September 2016. This oneweek<br />
student training program aimed at enriching<br />
skills of students with the state of art information on<br />
the modeling and experimental design techniques in<br />
the thrust areas of Mechanical Engineering. This was<br />
to inculcate research interests in this area. The<br />
speakers were Mr. Satya Prakash Sundara Bhanu, Mr.<br />
Pulimamaidi Srikanth Goud, Mr. Kamal Irukkula from<br />
EMUG Technologies, Hyd<strong>era</strong>bad.<br />
Aerial and underwater<br />
communication<br />
Avionics industry is a major multi-billion<br />
dollar industry worldwide. Avionics<br />
equipment on a modern military or civil<br />
aircraft\account for around 30% of the total<br />
cost of the aircraft, 40% in the case of a<br />
maritime patrol or anti-submarine aircraft<br />
and over 75% of the total cost in case of an<br />
airborne early warning aircraft.<br />
The lecture was about aerial and underwater<br />
communication on 30th September 2016.<br />
The resource person was Dr.M.R.Nayak who<br />
is an expert in the areas of oceanography<br />
and aerospace electronics and systems. The<br />
HOD of the Department of ECE Dr. G.R.L.V.N.<br />
Srinivasa Raju chaired the session and<br />
emphasized the importance of lecture on<br />
aerial and underwater communications.<br />
Modern Control of<br />
Electric Drives<br />
The Department of Electrical and<br />
electronics engineering of Shri Vishnu<br />
Engineering College for Women<br />
organized a TEQIP II sponsored oneweek<br />
faculty development program on<br />
“Modern Control of Electric Drives”<br />
during 12 and 17 September 2016. The<br />
resource persons were from reputed<br />
universities and industries. 16<br />
participants were from various<br />
engineering colleges attended the<br />
program. Dr. P. V. V. Rama Rao was the<br />
convenor and Mr. M.D.Lakshman Kumar<br />
and Mr. N.Venkata Ramana were<br />
coordinators.<br />
The Department of Information Technology<br />
conducted a one-week short term course on<br />
“Internet of Things using Arduino and<br />
Raspberry Pi” for faculty members through<br />
TEQIP-II during 17th and 22nd October<br />
2016.<br />
The resource persons were Mr. Naveen<br />
Kumar K, Mr. K. Shiva Kumar Goud and Mr<br />
B. Naveen, senior software engineers at<br />
Thingsnet Hyderbad. The program started<br />
with an inaugural function by the Principal<br />
Dr. G. Srinivasa Rao & Convener and HOD<br />
Department of IT Prof.P.Venkata Rama Raju.<br />
Design and simulation of<br />
Antennas & Microwave<br />
devices using ANSYS HFSS<br />
From 3rd to 7th October 2016, a short term<br />
course on “Design and Simulation of Antennas<br />
and Microwave Devices using ANSYS HFSS” was<br />
organized by the Department of Electronics and<br />
Communication Engineering.<br />
The objective of the program was to provide a<br />
platform for the academicians and industrial<br />
communities with a view to exploring and<br />
exchanging information on the progress of<br />
research and development in innovative antenna<br />
technology.<br />
The resource persons were from industry and<br />
academia. The former Vice Chancellor of Andhra<br />
University Dr.G.S.N.Raju was the chief guest for<br />
the inaugural function as well as the resource<br />
person for the workshop. It was really a feasting<br />
to the mind of all the participants and got<br />
benefitted from the talks of the eminent resource<br />
persons.<br />
DSP Design<br />
A three day workshop on “DSP Design TMS32C6713”<br />
under TEQIP-II was conducted by the Department of<br />
Electronics and Communication Engineering from<br />
29th September to 1st October 2016.<br />
The ov<strong>era</strong>ll objective of the workshop was to design<br />
a Digital Signal Processor using TMS320C6713 and<br />
the practical applications as well as basics of DSP<br />
with MATLAB and Simulink. The convener was Dr. G<br />
R L V N Srinivasa Raju and the coordinator was Mr.<br />
M.Prema Kumar, Associate Professor. The resource<br />
persons were Mr. Mayank Ranjan and Mr. Sri Ram<br />
from Crane Software International Limited,<br />
Bangalore. The faculty and students of III B.Tech<br />
participated in it.<br />
APP Development<br />
for beginners<br />
The Department of Electronics and<br />
Communication Engineering conducted a<br />
three-day workshop on “App<br />
Development for Beginners” from 10th to<br />
12th September 2016 for both faculty and<br />
students. The convener of the workshop<br />
was Dr. G R L V N Srinivasa Raju, Head of<br />
ECE Department and coordinators of the<br />
workshop were Mr. M. Prem Kumar,<br />
Associate Professor and Mr. M. Pradeep,<br />
Associate Professor. The resource person<br />
was Mr. K. Surya Gopal from Harman<br />
Connected Services, Bangalore.<br />
Power Electronic Converters<br />
The Department of EEE organized TEQIP-II<br />
sponsored one-week national level faculty<br />
development program on "Advances and<br />
Applications of Power Electronic Converters<br />
(AAPEC)” from 3rd to 8th October 2016.<br />
Faculty members along with M.Tech students<br />
participated.<br />
The objective of this program was to study<br />
the challenges in Advanced Technologies and<br />
to know the applications of Power Electronic<br />
Converters using various techniques.<br />
The resource persons were reputed<br />
universities and industry.<br />
13
Change language