Trouble shooting Lubricants on the Web Part 1

2/26/2017 Cement Kiln Pinion Gear Grease Spray System ­ Topic
Noria Corporation Forums Lubrication Industrial Lubrication Cement Kiln
Pinion Gear Grease Spray System
Go New Find Notify Tools Reply
Cement Kiln Pinion Gear Grease Spray
System
Welcome, Hussam Adeni [Logout]
Karl
Nielson
Level 1 ­ 1 to
50 posts
posted 18 May, 2004 01:57
We are haveing problems with a new Lincoln airless grease spray system on a
cement kiln.
I'm looking for recomendations for another spray system that is working. We
are useing Fuch Ceplattyn KG10LC Grease.
Thanks
Karl
Posts: 1 | Registered: Mon May 17 2004
greasetech
Level 1 ­ 1 to
50 posts
posted 18 May, 2004 22:03
What type of problems are your having with the system?
Posts: 1 | Location: Wall, NJ USA | Registered: Mon January 12 2004
Hide Post
Hussam
Adeni
Level 4 ­ 251
to 500 posts
Karl,
posted 23 May, 2004 10:31
Hide Post
Arupanjan@rediffmail.com is Cement and Steel Plant expert. A Tribol & Optimol
Sales & Service Manager in India for about 10 years, he is now with OKS India.
Pls contact him directly.
Hussam Adeni
Posts: 273 | Location: Singapore & Manila | Registered: Wed February 11
2004
Arupanjan
Level 3 ­ 101
to 250 posts
posted 25 May, 2004 08:42
Hide Post
Dear Karl
As Adeni said, I have seen Ceplattyn KG10LC only with Nozzles of HSA TD 25/26
and they are all with air for atomising. As ceplattyn KG10LC with a base oil
viscosity of 16000cst will definitely require air for spraying I am not aware of a
system that will work ok without air.
The most critcal question is what is the problem
was this problem generated after using this new Fuchs product and what was the
earllier lubricant?
who suggested to use KG10 LC in this system and what doees Lincoln approve?
if you pl reply to these.
Arupanjan Mukherji
Posts: 105 | Location: Kolkata, WB India | Registered: Sat March 20
2004
Powered by Social Strata
http://forums.noria.com/eve/forums/a/tpc/f/826604995/m/994102262?r=321100862#321100862 1/2