8 months ago

Software Guide V27 - Panamatic Mini, Midi, Optima 2 v1.6

• Turn the machine OFF

• Turn the machine OFF at the isolation switch • Remove the front panel of the machine by removing the fasteners identified below Remove the two bolts, gently pull the front cover forward and down • Gently pull the front panel forward and down to remove • Store front panel and fixings in a safe place Remove the four screws to release the PCB cover from PCB box Copyright © 2017 DDC Dolphin Ltd. Page 30 of 41 Feb 18 SGPana – V27 1.6

• Locate Dip switches • Locate Dip switch 3 and move it UP, note the position of the resistor Dip Switch 3 • Remove the program resistor (The resistor may be a different colours dependant on model of the machine) • Refit the PCB housing lid • Refit the front panel • Turn the machine ON at the isolation switch Copyright © 2017 DDC Dolphin Ltd. Page 31 of 41 Feb 18 SGPana – V27 1.6

cNODE® Transponders Maxi, Midi and Mini - Kongsberg Maritime
Kategorie mini midi maxi maxi 2 Modell HP 2170p ... - u:book
Line 6 PODStudio & TonePort MIDI Setup Guide (Rev 2 ... - Thomann
Vernier LabQuest Mini User's Manual - Vernier Software & Technology
Yotta Mini Sport Software installation guide - Axus
YOTTA Mini Software installation guide(5914KB) - Axus
Vision MINI Smart Camera Quick Start Guide - Microscan
Samsung Galaxy Mini 2 S6500L Unlock Software - GalaxyUnlocker
Samsung Galaxy Mini 2 S6500D Unlock Software - GalaxyUnlocker
Line 6 FBV MkII Advanced User Guide, English (Rev. 2)
User Guide for Alliance Planner Programming Software - UniMac
WinTEC3 Software user's Guide - Electromotive Engine Controls
MONOPACK 2 Manual - Pro/Motion Mechanik + Elektronik + Software
Installer's handbook - 1/3 Types of installation - 2/3 Software guide ...