CPT International 01/2018

PREVIEW / IMPRINT
Preview of the next issue
Publication date: June 2018
Selection of topics:
The production of Aluminium castings globally is dominated by the automotive industry. To ensure that the casting
quality is achieved, a more effective and technically sound melt treatment and a controlled pouring practice is essential.
virtual ESI production solution for castings with ESI ProCAST. The simulation software enables foundries to optimize the
methods and process conditions also in die casting.
By using a ladle casting machine, the Italian foundry Fonderie Palmieri benefits from significantly less rejects and improved
yield.
Imprint
Publisher:
German Foundry Association
Editor in Chief:
Michael Franken M.A.
Editor:
Robert Piterek M.A.
Editorial Assistant:
Ruth Frangenberg-Wolter
P.O. Box 10 51 44
D-40042 Düsseldorf
Telephone: +49 211 6871-358
Telefax: +49 211 6871-365
E-mail: redaktion@bdguss.de
Published by:
Giesserei-Verlag GmbH
P.O. Box 10 25 32
D-40016 Düsseldorf, Germany
Telephone: +49 211 6707-0
Telefax: +49 211 6707-597
E-Mail: cpt@stahleisen.de
Managing Director:
Frank Toscha
Advertising Manager:
Katrin Küchler
Circulation:
Gabriele Wald
Production Manager:
Burkhard Starkulla
Layout:
Mike Reschke
Advertising rate card No. 27 from 1.1.2016
Publication: Quarterly
Annual subscription rate (incl. postage)
Home: € 110,– incl. 7% VAT; Member States
in the EC: Subscribers with VAT-No. and
Third Countries: € 110,–; Subscribers without
VAT-No.: € 110,– plus 7% VAT;
Single copy € 33,–.
Minimum subscription period 12 months.
Termination of subscriptions can only be
made from 31st December and notice of
termination must be received by the
Publishers by 15th November.
Otherwise, the subscription is automatically
renewed and payable for a further
12 months.
© 2018 Giesserei-Verlag GmbH · Düsseldorf
Printed by:
Kraft Premium GmbH
Industriestr. 5 – 9
76275 Ettlingen, Germany
Printed on paper bleached totally chlorine-free
All rights, including those of translation into
foreign languages and storage in data banks,
reserved.
Photomechanical reproduction (photocopy,
microcopy) of this technical publication or
parts of it is not allowed without special
permission.
The reproduction in this journal of registered
trademarks does not warrant the assumption,
even without any special marking, that such
names are to be considered free under the
trade-mark law and may be used by anyone.
Audit Bureau of Circulation
ISSN 0935-7262
Casting Plant & Technology 1 / 2018 67