Junos OS MPLS Applications Configuration Guide - Juniper Networks

Junos 11.1 MPLS Applications Configuration Guide
bandwidth (Static LSP)
200
• Configuring Class-Type Bandwidth Constraints for Multiclass LSPs on page 137
Syntax bandwidth bps;
Hierarchy Level [edit logical-systems logical-system-name protocols mpls
static-label-switched-path lsp-name bypass],
[edit logical-systems logical-system-name protocols mpls
static-label-switched-path lsp-name ingress],
[edit logical-systems logical-system-name protocols mpls
static-label-switched-path lsp-name transit incoming-label],
[edit protocols mpls static-label-switched-path lsp-name bypass],
[edit protocols mpls static-label-switched-path lsp-name ingress],
[edit protocols mpls static-label-switched-path lsp-name transit incoming-label]
Release Information Statement introduced in Junos OS Release 10.1.
Description When configuring a static LSP, specify the traffic rate associated with the LSP.
Required Privilege
Options bps—Bandwidth, in bits per second. You can specify this as an integer value. You can also
Level
Related
Documentation
use the abbreviations k (for a thousand), m (for a million), or g (for a billion).
Range: Any positive integer
Default: 0 (no bandwidth is reserved)
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
• Configuring Static LSPs on page 141
Copyright © 2011, Juniper Networks, Inc.