Junos OS System Basics and Services ... - Juniper Networks

show cli
Syntax show cli
Release Information Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Command introduced in Junos OS Release 11.1 for the QFX Series.
Description Display configured CLI settings.
Required Privilege
Options This command has no options.
Level
view
List of Sample Output show cli on page 557
Output Fields Table 100 on page 557 lists the output fields for the show cli command. Output fields are
Table 100: show cli Output Fields
Field Name
CLI complete-on-space
CLI idle-timeout
CLI restart-on-upgrade
CLI screen-length
CLI screen-width
CLI terminal
CLI is operating in
CLI timestamp
CLI working directory
Sample Output
listed in the approximate order in which they appear.
Field Description
Capability to complete a partial command entry when you type a space or a tab: on or off.
Maximum time that an individual session can be idle before the user is logged off the router or switch.
When this feature is enabled, the number of minutes is displayed. Otherwise, the state is disabled.
CLI is set to prompt you to restart the router or switch after upgrading the software: on or off.
Number of lines of text that the terminal screen displays.
Number of characters in a line on the terminal screen.
Terminal type.
Mode: enhanced.
Date and time format for the timestamp. If the timestamp is not set, the state is disabled.
Pathname of the working directory.
show cli user@host> show cli
CLI complete-on-space set to on
CLI idle-timeout disabled
CLI restart-on-upgrade set to on
CLI screen-length set to 47
CLI screen-width set to 132
CLI terminal is 'vt100'
Copyright © 2011, Juniper Networks, Inc.
Chapter 8: Command-Line Interface Operational Mode Commands
557