Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
• If an invalid label is scanned when in<br />
<strong>Programming</strong> Mode, the scanner will<br />
emit a low tone to indicate that the label<br />
is either not a programming label or<br />
that it contains values outside of the<br />
acceptable programming range.<br />
• After five minutes of inactivity in<br />
<strong>Programming</strong> Mode, the scanner will<br />
revert to normal Operating Mode. Any<br />
options set during the programming<br />
session will be stored and activated.<br />
• If confusion arises as to which options<br />
have been set during a programming<br />
session, scanning the Return to Factory<br />
Settings label will reset the scanner to<br />
the original factory defaults for all<br />
options, regardless of interface type.<br />
We recommend that you use the table<br />
provided in the back of this manual to<br />
record all changes that you make. This<br />
will help to ensure that you can record<br />
all modifications that you have made<br />
to the factory default configuration.<br />
This will be very helpful if you must<br />
return the <strong>VS1200</strong> or <strong>HS1250</strong> to the<br />
factory default settings.<br />
10 <strong>VS1200</strong> & <strong>HS1250</strong> <strong>Programming</strong> <strong>Kit</strong>
Change language