VS1200 & HS1250 Programming Kit - MaRCo

TIMEOUTS
Timeouts allow you to shut off the scanner's laser
and/or motor if the scanner isn't used for a
predetermined period of time. This feature is
included to prolong the life of the motor and
Visible Laser Diode (VLD).
NOTE
Laser safety requires that the laser
switch off before the motor. If you set
the motor timeout shorter than the laser
timeout, the laser will switch off
when the motor times out.
If you want to maximize both productivity and
scanner life, set laser to timeout in five minutes,
but leave the motor on for fifteen minutes. The
scanner will be ready to scan, and you will prolong
the life of the VLD.
34 VS1200 & HS1250 Programming Kit