VS1200 & HS1250 Programming Kit - MaRCo

More documents

Recommendations

Info

RS-232 Communication Format : settings are used only with scanners which have an RS-232 interface. Options include Data Bits, Baud Rate, Parity, Handshake, Stop Bit, and Prefixes. OCIA Communication Format : is used only with scanners that have an OCIA communication interface. The labels in this manual allow you to change OCIA interface types and enable or disable an Intercharacter Delay. Symbology Selection: allow selection of the types of barcode (symbologies) the scanner can read. These features also include UPC/EAN Expansion, control the calculation and transmission of check digits for Code 39. If Interleaved 2 of 5 symbology is selected, label length settings are required. 4 VS1200 & HS1250 Programming Kit
SCANNER PROGRAMMING (HOW IT WORKS) The VS1200 & HS1250 features advanced programming capabilities which lets you change the scanner’s configuration and functional behavior by using the EAN-13 programming labels in this manual. The scanner’s operating parameters are held in three different portions of memory. • RAM (Random Access Memory) holds the current operational settings while the scanner is powered-up. These settings are lost when power to the scanner is removed. For example, the Increment Volume label changes the volume setting held in RAM, but is lost when power to the scanner is interrupted. RAM is temporary or ‘volatile’ memory. • Default Memory is stored in the EEPROM and holds the operational settings that are loaded to RAM each time R44-1340 5
Page 1 and 2: HS1250 & VS1200 Programming Kit
Page 3 and 4: Table of Contents ABOUT PROGRAMMING
Page 5 and 6: VS1200 & HS1250 PROGRAMMING W/BARCO
Page 7: scanner is interrupted, the volume
Page 11 and 12: PROGRAMMING YOUR SCANNER To program
Page 13 and 14: PROGRAMMING CONVENTIONS • All opt
Page 15 and 16: PROGRAMMABLE FEATURES The remainder
Page 17 and 18: INCREMENT TONE The Increment Tone l
Page 19 and 20: RETURN TO FACTORY DEFAULT Use this
Page 21 and 22: VOLUME SWITCH: DISABLE Use this lab
Page 23 and 24: SPEAKER: ON Use this label to enabl
Page 25 and 26: SPEAKER VOLUME PROGRAMMING The VS12
Page 27 and 28: SPEAKER VOLUME = MEDIUM Use this la
Page 29 and 30: SPEAKER TONE = LOW Use this label t
Page 31 and 32: SPEAKER GOOD READ TONE = HIGH Use t
Page 33 and 34: PRICE/WEIGHT CHECK DIGIT = 4 DIGIT
Page 35 and 36: PRICE/WEIGHT CHECK DIGIT = 4 DIGITS
Page 37 and 38: PRICE/WEIGHT CHECK DIGIT: DISABLE U
Page 39 and 40: SETTING LASER TIMEOUT The laser tim
Page 41 and 42: LASER TIMEOUT = 10 MINUTES Use this
Page 43 and 44: SETTING MOTOR TIMEOUT The Motor Tim
Page 45 and 46: MOTOR TIMEOUT = 15 MINUTES Use this
Page 47 and 48: MOTOR TIMEOUT = 60 MINUTES Use this
Page 49 and 50: DOUBLE READ TIMEOUT = 600MS Sets th
Page 51 and 52: DOUBLE READ TIMEOUT = 1 SECOND Sets
Page 53 and 54: HANDHELD PERIPHERAL PORT: DISABLE U
Page 55 and 56: HANDHELD PERIPHERAL PORT: SPEED = 5
Page 57 and 58: HANDHELD PERIPHERAL PORT: SPEED = 7
Page 59 and 60:
HANDHELD PERIPHERAL PORT: SPEED = 9
Page 61 and 62:
EDGE: DISABLE The Edge software onl
Page 63 and 64:
UPC-E TO UPC-A EXPANSION - DISABLE
Page 65 and 66:
UPC-E TO EAN-13 EXPANSION - DISABLE
Page 67 and 68:
UPC-A TO EAN-13 EXPANSION - DISABLE
Page 69 and 70:
UPC-A CHECK DIGIT TRANSMISSION: ENA
Page 71 and 72:
UPC-E CHECK DIGIT TRANSMISSION: ENA
Page 73 and 74:
EAN-8 CHECK DIGIT TRANSMISSION: ENA
Page 75 and 76:
EAN-13 CHECK DIGIT TRANSMISSION: EN
Page 77 and 78:
CODE 39 The labels on the following
Page 79 and 80:
CODE 39: CHECK DIGIT - VERIFY Use t
Page 81 and 82:
CODE 39: CHECK DIGIT - SEND Use thi
Page 83 and 84:
CODE 39: MINIMUM READ = 1 Minimum r
Page 85 and 86:
CODE 39: MINIMUM READ = 3 Minimum r
Page 87 and 88:
CODE 128 The labels on the followin
Page 89 and 90:
CODE 128: MINIMUM READ = 1 Minimum
Page 91 and 92:
CODE 128: MINIMUM READ = 3 Minimum
Page 93 and 94:
CODABAR: ENABLE Use this barcode to
Page 95 and 96:
CODABAR CHECK DIGIT: SEND Use this
Page 97 and 98:
CODABAR CHECK DIGIT: VERIFY Use thi
Page 99 and 100:
CODABAR START/STOP CHARACTER: SEND
Page 101 and 102:
INTERLEAVED 2 OF 5 If you select In
Page 103 and 104:
I 2 OF 5: DISABLE Use this barcode
Page 105 and 106:
I 2 OF 5: CHECK DIGIT - DON'T VERIF
Page 107 and 108:
I 2 OF 5: CHECK DIGIT - DON'T SEND
Page 109 and 110:
I 2 OF 5: MINIMUM READ = 2 Minimum
Page 111 and 112:
I 2 OF 5: MINIMUM READ = 4 Minimum
Page 113 and 114:
I 2 OF 5: FIRST LABEL LENGTH = 6 Se
Page 115 and 116:
I 2 OF 5: FIRST LABEL LENGTH = 10 S
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
I 2 OF 5: SECOND LABEL LENGTH = NON
Page 129 and 130:
I 2 OF 5: SECOND LABEL LENGTH = 6 S
Page 131 and 132:
I 2 OF 5: SECOND LABEL LENGTH = 10
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
INTERFACE SELECTIONS The VS1200 and
Page 145 and 146:
RS-232: BAUD RATE = 300 Use this la
Page 147 and 148:
RS-232: BAUD RATE = 2400 Use this l
Page 149 and 150:
RS-232: BAUD RATE = 9600 Use this l
Page 151 and 152:
RS-232: STOP BITS = 1 Use this labe
Page 153 and 154:
RS-232: CLEAR TO SEND - ENABLE Use
Page 155 and 156:
RS-232: PARITY = SPACE Use this lab
Page 157 and 158:
RS-232: PARITY = MARK Use this labe
Page 159 and 160:
RS-232: PARITY = NONE Use this labe
Page 161 and 162:
RS-232: XON/XOFF - DISABLE Use this
Page 163 and 164:
RS-232: DATA BITS = 8 Use this labe
Page 165 and 166:
RS-232: LABEL IDS DON'T SEND Disabl
Page 167 and 168:
OCIA INTERFACE = S-P OCIA Scan this
Page 169 and 170:
OCIA INTERFACE = NCR 9 BIT Scan thi
Page 171 and 172:
OCIA INTERCHARACTER DELAY - ENABLE
Page 173 and 174:
OCIA/RS-232 DUAL INTERFACE The Clas
Page 175 and 176:
NCR 8 BIT OCIA/NIXDORF RS-232 NOTE
Page 177 and 178:
NCR 9 BIT OCIA/NIXDORF RS-232 NOTE
Page 179 and 180:
SP OCIA/NIXDORF RS-232 NOTE This fe
Page 181 and 182:
NIXDORF OCIA/NIXDORF RS-232 NOTE Th
Page 183 and 184:
MULTIDROP SCANNER ADDRESS = p Scan
Page 185 and 186:
MULTIDROP SCANNER ADDRESS = r Scan
Page 187 and 188:
C INDEX Changing Barcode Types ----
Page 189 and 190:
P Price/Weight Check Digit - Disabl
Page 191 and 192:
FEATURE CHANGED CHANGED NAME FROM T
Page 193:
Corporate Headquarters 675 Basket R
show all

VS1200 & HS1250 Programming Kit - MaRCo

Create successful ePaper yourself

Delete template?

Save as template?