Vickers Low and High pressure Proguard Filters v-ff-mc-0001-e1

More documents

Recommendations

Info

Dimensions HV6R Housing mm (inch) ø29 (11.42) ø18 (0.71) Bracket ref. page 62 Filter assembly may be lowered through the bracket and secured with 5/8"-11x1 1/4" screws (4). 77.8 (3.06) Clogging Indicator 140 (5.51) 260 (10.24) 130 (5.12) 15x1.5 Vent Plug G 1/2 280 (11.02) 140 (5.51) 280 (11.02) Inlet 4" SAE Flange, Code 61 Outlet 8 EATON Low & High Pressure ProGuard Filters - HV6R V-FF-MC-0001-E1 June 2002 The lower housing may be rotated to locate the indicator at the 9 o'clock or 6 o'clock position (90˚ ccw or 180˚) Filter Housing/Bypass Valve Flow Data Flow versus pressure drop: 150 SUS (32 cSt) oil with specific gravity of ≤ 0.9 (See page 5 for specific gravity corrections for pressure drop.) Housing Bypass Valve Pressure drop - bar (PSID) (2.9) 0,2 0,15 (1.5) 0,10 0,05 (58) 4,0 110 (4.33) Refer to Model Code Drain Plug G 3/4 195 (7.68) 0 0 300 600 900 1200 1500 0 0 300 600 900 1200 1500 (79) (238) (396) (79) (238) (396) Flow Rate - L/min (USgpm) Flow Rate - L/min (USgpm) Pressure drop - bar (PSID)(100) 7,0 6,0 5,0 3,0 2,0 (15) 1,0
041 Series Replacement Filter Elements Element Model Code V041 1 B 5 L 03 1 2 3 4 5 6 1 Filter element V041 - For use with HV6R series housings 2 Element collapse rating 1 - 150 PSI Low Collapse NOTE: L-Pak elements are rated at 100 PSI collapse. If used in a Non-Bypass housing, a monitored differential pressure indicator (70 PSI max.) should be used. (Indicator option A, B, I, U, or V) Design Specifications Rated flow: 568 L/min (150 USgpm) with bowl length 5 O-ring per AS568-243 typ. Refer to model code 1135 L/min (300 USgpm) with bowl length 8 Housing & Compatible with most Element petroleum oil, water Compatibility: glycol, oil-in-water and water-in-oil fluids. Optional seals available for phosphate esters. Construction: C-Pak or L-Pak Temp range: -26°C to +121°C (-15°F to +250°F) Dimensions mm (inch) 152,4 dia. typ (6.00) 3 Seal material B - Buna-N V - Viton-A Viton is a registered trademark of E.I. DuPont 4 Element length mm (inch) 5 - 406 (16) 8 - 990 (39) 5 0411 C-Pak 406 (16) length Flow Rate - USgpm 50 100 150 200 0,7 0,6 0,4 0,3 0,1 0 0 100 300 C03 500 10 05 8 10 6 4 20 2 700 Flow Rate - L/min Pressure drop - bar 0411 C-Pak 990 (39) length Flow Rate - USgpm 50 100 150 200 250 300 0,6 0,4 0,3 0,1 C03 8 05 6 10 4 20 2 0 0 250 500 750 1000 Flow Rate - L/min Pressure drop - bar Element construction C - C-Pak (grade 3, 5, 10, 20) L - L-Pak (grade 3, 5, 10, 20) Filter Element Flow Data mm (inch) Flow versus pressure drop: 150 SUS (32 cSt) oil with specific gravity of ≤ 0.9 (See page 6 for viscosity corrections for pressure drop.) Pressure drop - PSID Pressure drop - PSID 6 Fluid cleanliness ratings Target fluid Code cleanliness level 03 16/14/12 or better 05 18/16/14 or better 10 20/18/15 or better 20 22/19/16 or better The table assumes limited ingression/single pass of pump flow through element. For detailed assistance, see “The Systemic Approach to Contamination Control” or contact your local Eaton representative. 0411 L-Pak 406 (16) length Flow Rate - USgpm 50 100 150 200 0,7 L03 10 0,6 0,4 05 8 6 0,3 10 4 0,1 0 0 100 300 500 20 2 700 Flow Rate - L/min Pressure drop - bar 0411 L-Pak 990 (39) length Flow Rate - USgpm 50 100 150 200 250 300 Pressure drop - bar 0,6 0,4 0,3 0,1 0 0 05 8 L03 6 10 4 2 20 250 500 750 1000 Flow Rate - L/min EATON Low & High Pressure ProGuard Filters - HV6R V-FF-MC-0001-E1 June 2002 9 Pressure drop - PSID Pressure drop - PSID
Page 1 and 2: 56 ± 0.2 (2.2 ± 0.5) ø130 +1.5 (
Page 3 and 4: Filter Guide Low Pressure Filters,
Page 5 and 6: General Information High Performanc
Page 7 and 8: Guidelines for Selecting Filters Ta
Page 9: HV6R Series Filters Flows to 1100 L
Page 13 and 14: Dimensions HV3R Housing mm (inch) H
Page 15 and 16: HF4RT Series Filters Flows to 568 L
Page 17 and 18: 405 Series Replacement Filter Eleme
Page 19 and 20: Performance Curves Filter Housing/B
Page 21 and 22: Dimensions Mechanical Indicator mm
Page 23 and 24: Performance Curves Filter Housing/B
Page 25 and 26: Dimensions hanical Mechanical Indic
Page 27 and 28: OFRS-15 Series Filters Flows to 60
Page 29 and 30: Model Codes Filter and Element OFRS
Page 33 and 34: Model Codes 1 Series designation OF
Page 37 and 38: Dimensions OFRS-60-2 Manifold Mount
Page 39 and 40: Model Codes R-Pak Element Only 1 Se
Page 41 and 42: Dimensions HS22 Series Housing mm (
Page 43 and 44: OF3 Series Inlet Strainers Flows to
Page 45 and 46: 10F, 50F and 100F Series — Indica
Page 47 and 48: Model Code 1 Fluid Compatibility* F
Page 49 and 50: Dimensions 50F* Model Series mm (in
Page 51 and 52: HF2P Series Filters Flows to 90 L/m
Page 55 and 56: Dimensions HF3P Housing mm (inch) 1
Page 57 and 58: HF3PS Series Filters Flows to 570 L
Page 61 and 62:
Dimensions HF4P Housing mm (inch) 2
Page 63 and 64:
Accessories Electrical Pressure Swi
Page 65 and 66:
Accessories Indicator Model Code PE
Page 67 and 68:
Notes
show all

Vickers Low and High pressure Proguard Filters v-ff-mc-0001-e1

Create successful ePaper yourself

Delete template?

Save as template?