Vickers Low and High pressure Proguard Filters v-ff-mc-0001-e1

More documents

Recommendations

Info

Installation Dimensions Inlet Strainer mm (inch) Minimum Screen Area Model Series cm 2 (in 2 ) A (NPTF pipe thread) B C ±3,2 (±0.125) OF3-08 710 (110) 1” 67,8 (2.67) 135,9 (5.35) OF3-10 1032 (160) 11 /4” 88,1 (3.47) 174,0 (6.85) OF3-12 2194 (340) 11 /2” 101,6 (4.00) 250,2 (9.85) OF3-16 2194 (340) 2” 101,6 (4.00) 250,2 (9.85) OF3-20 2581 (400) 21 /2” 131,3 (5.17) 256,5 (10.10) OF3-24 3226 (500) 3” 131,3 (5.17) 299,2 (11.78) Typical Installations 42 EATON Low & High Pressure ProGuard Filters - OF3 Series Inlet Strainers V-FF-MC-0001-E1 June 2002 C Oil level Pump intake connection Access opening should be provided so strainers can be removed for cleaning without draining fluid from tank. A Pipe joints submerged B Disconnect pipe union to remove strainers
10F, 50F and 100F Series — Indicating Inlet Strainers Flows to 700 L/min (185 USgpm) — Pressures to 0,3 bar (5 PSI) vacuum to 20 bar (300 PSI) positive Features and Benefits • Stainless elements have 149 micron (100 mesh) screen to protect pumps from solid contaminants. • Available flows to 700 L/min (185 USgpm) on pressure inlets and 530 L/min (140 USgpm) on vacuum inlets. • Standard integral air bleed feature prevents formation of large bubbles. This provides faster priming of pumps at startup and prevents pump damage. • Housing can be adapted to handle most hydraulic fluids. • Large, easy to read, standard visual indicator (or optional electrical indicator) informs operator when element needs to be cleaned. • Elements can be cleaned and reused. • Standard bypass valve protects against pump damage. Design Specifications Rated flow: See table Temp range: -40°C to +107°C (-40°F to +225°F) Pressure rating: 10F and 50F: 0,3 bar (5 PSI) vacuum to 3 bar (50 PSID) positive 100F: 20 bar (300 PSI) Filtration: Filter is supplied with 149 micron (100 mesh) wire cloth element. Fluid and seals: Standard model is compatible with most petroleum oil, water glycol, and water-in-oil fluids. Optional seals sand coatings are available for use in phosphate esters and oil-water emulsions. See fluids and seals note in Model Code. Material: Cover Die cast aluminum Housing Cast aluminum Dry weight: (Approximate) 10F: 2,5 kg (5.5 lb) 50F: 5,7 kg (12.5 lb) 100F: 16,3 kg (36.0 lb) Maximum Flow Ratings This table presents recommendations for use in both pressurized inlet systems and the more common vacuum inlet systems. The effects of fluid viscosity, specific gravity, and fluid flow rate on the pump inlet system (including the filter) have been taken into consideration. Even with a bypass condition in effect due to element dirt loading, a margin of pump protection is still afforded. Vacuum Inlet* Pressurized Inlet** Normal Special Normal Special Service† Service†† Service† Service†† Model L/min L/min L/min L/min Series (USgpm) (USgpm) (USgpm) (USgpm) 10FA 45 (12) 30 (8) 61 (16) 42 (11) 50FB 106 (28) 76 (20) 140 (37) 95 (25) 50FC 178 (47) 125 (33) 257 (68) 167 (44) 50FD 254 (67) 178 (47) 329 (87) 238 (63) 100FE 367 (97) 284 (75) 492 (130) 367 (97) 100FF 530 (140) 367 (97) 700 (185) 492 (130) * 0,3 bar (5 PSI) vacuum to 0 bar (0 PSI) ** 0 bar (0 PSI) to 50 bar (3.5 PSI) † For use with petroleum oil up to 48 cSt (225 SUS) with less than 457mm (18”) lift on vacuum applications. †† For use with petroleum oils above 48 cSt (225 SUS) and fire resistant fluids. EATON Low & High Pressure ProGuard Filters - 10F, 50F & 100F Series Indicating Inlet Series V-FF-MC-0001-E1 June 2002 43
Page 1 and 2: 56 ± 0.2 (2.2 ± 0.5) ø130 +1.5 (
Page 3 and 4: Filter Guide Low Pressure Filters,
Page 5 and 6: General Information High Performanc
Page 7 and 8: Guidelines for Selecting Filters Ta
Page 9 and 10: HV6R Series Filters Flows to 1100 L
Page 11 and 12: 041 Series Replacement Filter Eleme
Page 13 and 14: Dimensions HV3R Housing mm (inch) H
Page 15 and 16: HF4RT Series Filters Flows to 568 L
Page 19 and 20: Performance Curves Filter Housing/B
Page 21 and 22: Dimensions Mechanical Indicator mm
Page 23 and 24: Performance Curves Filter Housing/B
Page 25 and 26: Dimensions hanical Mechanical Indic
Page 27 and 28: OFRS-15 Series Filters Flows to 60
Page 29 and 30: Model Codes Filter and Element OFRS
Page 33 and 34: Model Codes 1 Series designation OF
Page 37 and 38: Dimensions OFRS-60-2 Manifold Mount
Page 39 and 40: Model Codes R-Pak Element Only 1 Se
Page 41 and 42: Dimensions HS22 Series Housing mm (
Page 43: OF3 Series Inlet Strainers Flows to
Page 47 and 48: Model Code 1 Fluid Compatibility* F
Page 49 and 50: Dimensions 50F* Model Series mm (in
Page 51 and 52: HF2P Series Filters Flows to 90 L/m
Page 55 and 56: Dimensions HF3P Housing mm (inch) 1
Page 57 and 58: HF3PS Series Filters Flows to 570 L
Page 61 and 62: Dimensions HF4P Housing mm (inch) 2
Page 63 and 64: Accessories Electrical Pressure Swi
Page 65 and 66: Accessories Indicator Model Code PE
Page 67 and 68: Notes

Vickers Low and High pressure Proguard Filters v-ff-mc-0001-e1

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?