CE EQUIPMENT CONNECTION - Compact Equipment

Ingersoll Rand
Ingersoll Rand
Ingersoll Rand features the BXR-300E reversible, vibratory
plate compactor, weighing 716 lbs and designed for compaction
of granular soils, mixed soils and well-graded aggregates.
Key features of the BXR-300E include a high-position handle
to increase maneuverability, sealed exciter bearings to reduce
maintenance and shock mounts to isolate vibration from the
engine and guide handle.
This model is powered by an air-cooled, 6.7-hp Yanmar diesel
engine and an electric start to provide years of dependable
operation. An engine protection cage prevents damage to the
unit during use and transport.
With a patent-pending vibration system, this model generates
smooth, reversible movement to ensure productivity. The reversing
feature changes the unit’s travel direction and allows the operator
to enter and exit a work area along the same path. RS#56
Genie
Genie has redesigned its GTH-1048 and
GTH-1056 rough terrain telehandlers to easily
maneuver in tight spaces without compromising
reach and lift capacity. Whether they are
needed to lift or set materials around a worksite,
both are ideal machines for moving heavy
loads, like steel and bricks, with a maximum
lift capacity up to 10,000 lbs. The GTH-1048
has 31 ft of outreach and is capable of lifting
6,000 lbs to 48 ft and the GTH-1056 features
an outreach of 40 ft and lifts 4,000 lbs to 56
ft. With an outside turning radius of just under
14 ft and three different steering modes — crab,
coordinated and front wheel — the GTH-1048
and GTH-1056 come standard with a multitude
of features that allow easy maneuverability
around tight jobsites. Both offer the choice of
a turbocharged, four-cylinder Perkins or John
Deere diesel engine and both feature standard
four-wheel drive. RS#58
FFC
The concrete claw from FFC is available with a
24-in. working width. It’s the perfect attachment
for removing concrete on sidewalks, driveways or
any construction site. It features high-strength cast
replacement points and end plates and tooth shanks
made with high-strength T1 steel. It also offers a 1-
by 8-in. wear resistant pacal steel tapered cutting
edge and name brand replaceable points with 1
1/2-in. wide shanks. Rubberized fl ex pins securely
fasten replaceable points. The Claw’s teeth slide
under the concrete to lift and load. It provides easy
transportation and disposal of heavy concrete slabs
and allows for a cleaner, quicker and more effi cient
method of concrete removal. It also comes with a
standard one-year warranty on structure. RS#57
40 Compact Equipment January 2008 compactequip.com