Advanced Spring Rater - Roehrig Engineering

exported to a file or the clipboard in three different formats using the Export box
located under the Report box. Test report rates are an average of all data points in
the test range.
Point Report – The point repot can be used to find the force, displacement or rate
at any requested point or as a point referenced from the full length point of the
spring (if you enter 1” with the R box checked this point would be 1” from the
full length position). By default, the full-length point will automatically be the first
point in the report. If the R box is empty, that row will display data at that point in
force or displacement depending on the units you select.
Statistical Report – On this page you are able to compare all open data files. Use
the start and end point boxes to define the report area. Data for each spring will
be displayed as well as minimum, maximum, average, and standard deviation in
compression, extension, and average data. Like the data report page this page
displays a end point rate and a average rate.
24