Advanced Spring Rater - Roehrig Engineering

S A F E T Y N O T I C E S
THE TEST EQUIPMENT DESCRIBED AND WRITTEN ABOUT WITHIN
THIS SUITE OF MANUALS MUST BE OPERATED USING PROCEDURES
THAT PROVIDE THE MAXIMUM LEVELS OF SAFETY TO PERSONNEL
AND TO THE EQUIPMENT ITSELF.
All local and National Safety Standards along with company-specific safety
procedures MUST be observed at all times. It is essential that a detailed study of
the information contained in the “Safety Considerations” section of this manual is
made before operating the test equipment.
The following guidelines are laid down as MINIMUM recommendations.
Ensure that safety interlocks are fully functional at all times.
Only operate the test equipment after ensuring that no personnel are present in
any areas that may be regarded as potentially hazardous. This includes the area
around the test equipment and its component parts.
All potential work area hazards must be properly guarded and all guards correctly
closed BEFORE the test equipment is operated.
Only trained personnel should operate the test equipment or be allowed to
conduct tests using this equipment. The operators MUST fully understand the
Safety Considerations, Technical Descriptions and Operating Instructions
contained within this manual, before operating the test system.
Always ensure that the test equipment is operated within its design limitations.
5