Drive_DriveView9_Manual_EN_200219

Project
view, enter the number of graphs (1-8), and click the Change button to see the monitoring
graphs, depending on the set number. By default, all channels are allocated as graph 1. If
you do not select separate view of channels, only 1 graph is shown again and all channels
are shown in that one graph.
2 Monitor Screen Settings
[Chat Dialog Description]
a. Color
You can change the color of channels by channel.
b. Channel Location
You can select the channel location for each channel
c. Line Width
Select the line width of the channel.
d. Minimum value
You can change the minimum value of the Y axis by channel.
e. Maximum value
You can change the maximum value of the Y axis by channel