Drive_DriveView9_Manual_EN_200219

Online
[Chat Dialog Description]
a. Phone Number: Input the phone number assigned to the drive.
b. Communication Port: Select the COM Port connected to the drive. Only the COM Port
installed in the system will be displayed. You cannot use the same COM Port for each
Modbus-RTU and LS485.
c. Communication Speed: Input the communication speed.
d. Parity Bit: Input the parity bit.
e. Data Bit: Input the data bit.
f. Stop Bit: Input the stop bit.
g. Flow Control: Select the flow control.
h. Wait time (Before): Delay time used for RTS control (before transmission)
i. Wait time (After): Delay time used for RTS control (after transmission)