Drive_DriveView9_Manual_EN_200219
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Online
4 Online
4.1 Connection Option
Set the network to connect with the drive.
The connection method can be both Ethernet and Serial, and supports all three protocols (Modbus-
TCP, Modbus-RTU, LS485).
Select the menu [HOME] – [Settings].
[Chat Dialog Description]
a. Method: Set the communication media to be used when there is a connection with the drive.
You can set to Modbus-TCP, Modbus-RTU, LS485.
b. Steps: Set the structure of connection with the drive. You can select from local, 1-step
remote, and 2-step remote connection settings.
c. Timeout: Enter the communication timeout with the drive to one thousandth of a second.
d. Retry Attempt: Enter the number of communication attempts to try after communication
failure.
e. Connect: This is a set access option that tries to establish a connection with the drive.
f. Setting: Displays a dialog to set the IP address.