Drive_DriveView9_Manual_EN_200219

Troublesh Technolo
ooting gy Use
Online
4.2 Connect/End Connection
This tries to establish a connection with the drive, depending on the access option you set.
Select the menu [HOME] – [Connect].
A dialog box appears during connection.
If a normal connection cannot be achieved
1) If the project drive and the connection drive are different models
A normal connection will not be made and the following dialog box will be displayed.
2) If the project drive and the connection drive have a different code version (If the version of
the connection drive is higher)
The following dialog box is displayed. If the “Yes” button is clicked
3) If the project drive and the connection drive have different code versions (If the version of
the connection drive is lower)
45