Drive_DriveView9_Manual_EN_200219

Troublesh Technolo
ooting gy Use
Specialized Features
6.3 Wizard
This section describes the Wizard, which is a feature that allows you to set up important parameters
step by step during initial drive installation.
6.3.1 Run
Select the menu at [Tools] – [Parameter Wizard]. The wizard screen is displayed corresponding to the
selected model. (Here, the explanation is based on iS7.)
6.3.2 Step-by-step Settings
Set the parameter using the 10 steps of the wizard (excluding install). To move between steps, you
can go to the previous step or the next step by clicking the button corresponding to each step or by
clicking the Previous Next button.
The steps and the step-by-step parameter types may vary by model.
1 Motor & Control
65