Interlift ILK - It works! - Palfinger
Interlift ILK - It works! - Palfinger
Interlift ILK - It works! - Palfinger
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
6 Electrical Installation <strong>ILK</strong> PLUS INSTALLATION MANUAL<br />
6.3 On-off Switch Trailer application<br />
On a trailer installation the control port J11 has to be connected with a on off toggle switch connecting 2 and<br />
4 on port J11 together.<br />
Unplug exsiting J11 connector from board<br />
Install 2 Position Toggle Switch in Control Box Face<br />
Run leads from Toggle Switch to #2 & #4 on Circuit Board<br />
Use Tie Straps to hold unused J11 Connector in safe location<br />
On-Off-Switch<br />
The Circuit Board is located behind the rubber cover on the curb side of the 7” x 7” mount tube.<br />
Use a 2-wire harness to install the on-off switch at control box.<br />
When harness and switch are installed, always replace the plastic clamp back on the rubber cover.<br />
Revision 1.2 - 29 -
Change language