Product Catalogue 2018-2020

Illuminated arrows as per RSA
Ordering Information
Description Order No. Price € + VAT
18
Illuminated arrow type L 8 LED (12 volt / 24 volt)
BASt test no.: V4-55-2010
With 8 mounted LED lamps in ultra-flat housing, 200 mm Ø, yellow,
for 12 V or 24 V operation. Mounted on a frame. In the middle on the
back there is a turning device to turn the arrow to point to the right
or left. Also with night-time reduction feature. With 4.5 m connection
lead and battery clamps.
Mean power consumption (12 v): approx. 2.95 A, (24 V): approx. 1.43 A
Dimensions: 1000 x 1200 x 170 mm (W x H x D), weight: approx. 9 kg W 5194L 864,00
19
Illuminated cross type LK 9 LED (12 volt / 24 volt)
BASt test no.: V4-55-2010
With 9 ultra-flat LED lamps mounted on a profile frame, 200 mm Ø,
yellow. Also with night-time reduction feature. Flashing frequency
approx. 40 flashes/min. This illuminated cross lets you safeguard
your vehicle correctly on the hard shoulder. It is fitted with a bracket
and can be hung easily in the rear tailgate of a truck, for example.
Mean power consumption (12 v): approx. 3.40 A, (24 V): approx. 1.55 A
Dimensions: 1000 x 830 x 170 mm (L x W x H), weight: approx. 19 kg W 5210L 1.342,00
20
21
Illuminated arrow L 15 LED (12 volt / 24 volt) as per RSA
BASt test no.: V4-55-2010
With 15 ultra-flat LED lamps mounted on a profile frame, 200 mm Ø,
yellow, with fixture and cable remote control (cable 15 m long) for
12 V or 24 V operation. The corresponding arrow direction or the
illuminated cross can be selected electrically using the remote
control. Also with night-time reduction feature. The illuminated
arrow can be used by simply hanging it from the rear tailgate of
a truck and connecting up to the battery in just a few seconds.
Mean power consumption (12 v): approx. 3 A, (24 V): approx. 1.42 A
Dimensions: 990 x 1030 x 140 mm (L x W x H), weight: approx. 20 kg W 5200L 2.028,00
Lifting and lowering device for illuminated arrow made of steel (flat)
If requested, the illuminated arrow
is also available in a double-sided
version as L 30 e.g. for marking
machines.
Electric lifting and lowering device on a flat frame. For fastening to
your roof rack. The electric lifting and lowering function is triggered
auto-matically when the illuminated arrow is switched on by means
of the remote control supplied with the illuminated arrow. The lifting
and lowering device is supplied without illuminated arrow and
without vehicle-specific roof rack. Connection voltage: 12 V or 24 V.
Dimensions: 1010 x 1010 x 180 mm (L x B x H), weight: approx. 40 kg W 5260C 1.316,00
22
Illuminated arrow type L 15 LED with 2 LED flash lights 340 mm Ø
BASt test no.: V4-55-2010 (lamps 200 Ø); V4-69-2011 (lamps 340 Ø)
Illuminated arrow L 15 LED with cable remote control and 8 m power
cable, including two LED flash lights 340 mm Ø, permanently connected
to the controller with two connection leads (each 1 m long) with
4-pin plug, operating voltage 12 V or 24 V, including undervoltage
protection and reverse polarity protection together with night-time
reduction feature.
Mean power consumption (12 v): approx. 3.35 A, (24 V): approx. 1.58 A
Top element made of steel for fitting in the illuminated arrow frame
to accommodate the two flashlights when using a flat lifting and
lowering device (W 5260C).
Additional support for 2 LED flash lights 340 mm Ø, only necessary
when using the electric or mechanical lifting and lowering device
in picture 21. The additional support is inserted in the lifting and
lowering device to hold the two flashlights in lowered state.
W 5220L
W 5270
W 5272
2.704,00
163,00
88,50
10