Product Catalogue 2018-2020

Additional features for the visually impaired, Special test signal head
Ordering Information
Description Order No. Price € + VAT
92
Set for fitting a complete pedestrian crossing with acoustic and
tactile signal transmitters
Additional feature for the visually impaired as per RiLSA. This set can
be used to provide an orientation signal (continuous pilot signal, then
a clearance signal when the traffic light changes to green) emitted
by an acoustic signal transmitter. This feature is already available at
increasing numbers of stationary traffic light systems. The special
request button for the visually impaired are fitted with tactile signal
transmitters on the underside of the button which vibrate when the
traffic light changes to green to indicate the green phase. Similarly, a
tactile arrow symbol under the button shows the direction and type of
pedestrian crossing. Depending on the crossroads controller at which
the set is to be used, a corresponding connection box is required
or the mobile signal system has to be prepared with an additional
connection socket.
Please ask us to send you an individual offer for the set as additional
feature for the visually impaired, stating the type of your signal system!
Set for traffic light systems type EPB 12 / EPB 24 / EPB 48
42 volt version; set consisting of two pedestrian signal heads with
integrated acoustic modules, in the 3rd chamber in each case and with
two request push-buttons for a pedestrian crossing; for connecting
to crossroads controllers type EPB 12, EPB 24 and EPB 48. EP 6031AC on request
93
Set for traffic light systems type MPB
12 volt version; set consisting of two separate acoustic modules with
holder and two request push-buttons for a pedestrian crossing; for
connecting to mobile controllers type MPB 4400 or MPB 4000.
MP 4070
on request
Set for pedestrian traffic light systems type FÜ 12 / 230 V
12 volt version; set consisting of two separate acoustic modules
with holder and two request push-buttons for a pedestrian crossing;
for connecting to mobile controllers type FÜ.
FÜE 017
on request
Set for pedestrian traffic light systems type FG 2
12 volt version; set consisting of two separate acoustic modules
with holder and two request push-buttons for a pedestrian crossing;
for connecting to mobile controllers type FG 2.
FÜE 598
on request
94
Special test signal head for our EPB series
Handy test signal head for quick and easy function test of controllers,
cable lines and signal heads immediately at the signal system. Permits
effective troubleshooting on site with no great workload, with fast
localization e.g. of a wire break in a traffic signal cable or of a defective
signal head, with subsequent specific elimination of the fault.
Waterproof housing for outside use (IP 65) with carrying strap contains
four signal lamps 100 mm (2 x red, 1 x yellow and 1 x green, bulbs
42 V / 40 W Ba 20 d). Connected to the controller or cable line with
approx. 3 m connection lead with 7-pin connector for EPB 6000S or
with 13-pin plugin adapter for EPB 12, EPB 24 and EPB 48 on request.
Special test signal head
Plug-in adapter for testing EPB 12, EPB 24 and EPB 48
EP 2429
EP 4881
463,00
38,00
33