Product Catalogue 2018-2020

Traffic light MPB 4400
Ordering Information
Description Order No. Price € + VAT
57
MPB 4400, radio-controlled traffic light, vehicle-actuated
Consisting of two signal heads, radio / cable / quartz control. With case
for two batteries 12 V / 170 Ah. Signal protection as per RiLSA. This
vehicle-actuated radio traffic light system should be used where high
volumes of traffic are expected at different times. The standard system
is equipped with radar detectors. Additional signal heads can be added
with radio or cable control to turn this system into a crossroads traffic
light system. The corresponding programming device (no. 60) is
required to program the traffic light system.
Traffic light (2 signal heads) radio-controlled – vehicle-actuated.
Signal head radio-controlled, vehicle-actuated
MPB 4400, cable-controlled traffic light, vehicle-actuated
as described under no. 57, but without radio control
Traffic light cable-controlled, vehicle-actuated
Signal head cable-controlled, vehicle-actuated
MPB 4400, radio-controlled traffic light
Consisting of two signal heads, radio / cable / quartz control. With
case for two batteries 12 V / 170 Ah. Signal protection as per RiLSA.
Additional signal heads can be added with radio or cable control
to turn this system into a crossroads traffic light system. The
programming device allows for manual control and other special
functions for every signal head. The corresponding programming
device (no. 57) is required to program the traffic light system.
Traffic light radio / cable / quartz control
Signal head radio / cable / quartz control
MPB 4400, quartz and cable-controlled traffic light
as described under no. 57, but without radio control
Traffic light quartz and cable-controlled
Signal head quartz and cable-controlled
Weight of all signal heads MP 4400 on casing approx. 45 kg.
PB 4400
PB 4401
PB 4500
PB 4501
PB 4600
PB 4601
PB 4700
PB 4701
6.666,00
3.333,00
4.598,00
2.299,00
6.188,00
3.094,00
3.766,00
1.883,00
58
MPB 4400, cable-controlled traffic light 42 volt
Consisting of two signal heads. With signal protection as per RiLSA,
supplementary equipment for 42 V operation. The signal heads are
connected with a single cable (twisted pair) for data transfer and
power supply. This traffic light is ideal particularly for long-term
roadwork sites because the power supply of 230 V AC only has to be
connected to one signal head as described above. As a safeguard in
the event of a power failure at the roadwork site, each signal head
can also be equipped with a 12 V battery: the controller changes over
automatically to battery power in the event of a power failure, without
interrupting the traffic light. The corresponding programming device
(no. 60) is required to program the traffic light.
You will find traffic light connecting
cable and accessories on page 27.
Traffic light (2 signal heads) cable-controlled – 42 volt
Signal head cable-controlled – 42 volt
Surcharge LED lamps* when purchasing new system for red,
orange, green. Per signal head
Surcharge multi-frequency technology* when purchasing new system
with field strength display per signal head
PB 4750
PB 4751
EH 2135S
EF 0800
4.806,00
2.403,00
410,00
390,00
24
* more information on page 30.