Product Catalogue 2018-2020

PB CAM for intelligent traffic telematics
Ordering Information
Description Order No. Price € + VAT
95
PB CAM video detector V.2.0
for all vehicle-actuated traffic light systems in the EPB and MPB
series by Peter Berghaus GmbH for detecting the presence of
vehicles in the vicinity of traffic light systems.
The detection system has eight free monitoring zones. On installing
the PB CAM, these are simply drawn on the laptop or PC monitor as
virtual contact loops in the course of the road. Up to eight detection
zones can be allocated quickly and easily using the mouse in any size
and direction to the four freely configurable switching outputs. The
power supply for the PB CAM comes from the traffic light controller.
PB CAM is supplied complete with approx. 1 m connection lead with
plug connector, galvanised rotating and swivelling fixture and the
necessary software. EP 2370 2.684,00
96
Connection lead PB CAM with connection module
Connection lead between PB CAM and connection module, for
outdoor use, 12 x 0.25 mm screened cable (black), complete with
12-pin water-proof metal plug and coupling.
Cable: 10 m long
Cable: 30 m long
Cable: 50 m long
Cable: 100 m long
EP 2380
EP 2381
EP 2382
EP 2383
117,00
181,00
245,00
360,00
97
Connection module for Berghaus PB CAM
Connection module for Berghaus PB CAM video detector V.2.0 for
installation in the immediate vicinity of the traffic light controller,
complete in waterproof housing with evaluation PCB and interface
adapter RS232 to RS485, 1 x camera jack, 1 x PC jack, 4 x jacks for
output 1 to 4 and fixture. EP 2371 451,00
98
PC connection lead for PB CAM video detector V.2.0
PB CAM connection lead for programming using a laptop or PC EP 2372 78,00
i
Our PB CAM offers you essential advantages
of smart traffic telematics.
• No damage to the road surface by cutting it up for the
detection loops
• Installed in next-to-no time, extremely simple and
very flexible to use
• Simple with automatic alignment after transmitting
the configuration
• Individual configuration by clicking the mouse for
up to eight monitoring zones, also with different
directional evaluation
• Different detection zones can be allocated to the
same switching outputs or linked (holding time up
to 3 minutes)
34