Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Crossroads controllers for portable traffic light systems
Ordering Information
Description Order No. Price € + VAT
102
EPB 24 multiprocessor – local controller system
Controller system type EPB 24 multiprocessor (master and slave) for
local control of up to 24 signal groups with maximum 48 power cards
for 96 three-aspect, fully monitored LED traffic light signal heads.
With signal protection as per RiLSA and VDE 0832, installed in IP 55
cabinets.
EPB 24 Master for max. 8 power
cards or with no power cards
The multiprocessor system with separate processors for control and
monitoring systems offers the greatest possible safety. The system
has extensive protection and control functions: red / yellow / green
light monitoring, minimum green phase and intermediate phase
monitoring, green / green, red, yellow, green status monitoring,
cycle and under-voltage monitoring.
The EPB 24 multiprocessor controller offers many modes and
additional functions as a standard feature ex works, such as:
Fixed-phase or vehicle actuated (VA) mode with normal day programs
and public holiday programs; VA mode with green phase extension
or green phase on request; request mode (basic setting: continuous
red); coordination mode (progressive signal system with GPS);
manual, flashing and blanking mode; test mode (without outside
equipment); cycle mode (testing correct connection and allocation
of signal heads); changing green phase parameters and progressive
signalling parameters during on-going operation; overprogramming
without having to switch the traffic lights off.
EPB 24 Slave for max. 8 power
cards
EPB 24 crossroads controller „Master“ for up to 8 power cards.
Dimensions: 615 x 1375 x 375 mm (W x H x D), weight: approx. 111 kg
EPB 2400
on request
EPB 24 crossroads controller „Master“ in compact design without
any power cards.
Dimensions: 615 x 1000 x 375 mm (W x H x D), weight: approx. 63 kg
EPB 2410
on request
EPB 24 Slave as mast distribution
unit for max. 4 power cards
EPB 24 crossroads controller „Slave“ for up to 8 power cards.
Dimensions: 615 x 1160 x 375 mm (W x H x D), weight: approx. 94 kg
EPB 24 crossroads controller „Slave“ as mast distribution unit
for up to 4 power cards.
Dimensions: 370 x 380 x 350 mm (W x H x D), weight: approx. 15 kg
EPB 2402
EPB 2412
on request
on request
i
Slave
EPB 24
Every time you use our EPB 24 you can make
considerable savings in terms of the costs for
material, transport and personnel.
Slave
EPB 24
The use of our local controller systems EPB 12 or EPB 24
considerably reduces the wiring required (by up to 50 %).
The wiring for signal heads, push buttons and radar detectors
etc. no longer has to be installed and routed through to a
central point but just to the slave distribution units EPB 12
or EPB 24 at the specific corner points of the crossroads.
Slave
EPB 24
Power cable
Data bus cable
Master
EPB 24
230 V
Extensive wiring across the streets is no longer needed because
all devices in our multiprocessor system only have to be
connected with one single databus cable (as an open loop line)
and possibly with a power supply cable. This not only reduces
installation time and cable lengths but also makes it possible
to use lighter overhead road cabling systems. That saves both
time and money!
36