Product Catalogue 2018-2020

Marking foil and accessories
Marking foil and accessories
Changed road layouts or roadwork situations put many road users under considerable stress.
Unusual routing, larger volumes of traffic, narrower lanes and speed limits demand the full
attention of every motorist. Stressful conditions like these are further compounded when it gets
dark and rains.
Yellow lane marking lines through roadworks and at changed road layouts make a considerable
contribution to safety. Highly reflective temporary lane markings give road users a clearly visible
indication of where to go, particularly in the dark and in wet driving conditions.
Temporary yellow markings can be produced with different materials such as marking paint, spray
plastic, thermoplastic or lane marking foil. Marking materials used at roadworks must withstand
being rolled over by heavy commercial vehicles throughout the entire duration of the construction
work, with a clear directional effect in every weather. Once the construction work has finished, the
temporary marking has to be removed again. The marking material must therefore be selected so
that it can be removed from the road surface again gently and without leaving any residues, in an
environmentally friendly procedure that is appropriately fast.
Berghaus Traffic Technology therefore offers a complete range of temporary lane marking foils
for all traffic categories with outstanding day and night visibility, available in various widths and
colours. The adhesion properties of the foils can be enhanced by using a primer that is specially
rated to the different marking foils and applied to the road surface; this primer coating is indispensable
for long-term construction work. The offered foil laying devices make it easier to
apply the lane marking foils. BASt-tested marking studs, reflector elements, visual signs and
two-component adhesive round off the lane marking range.
66