Wood brochure - South Africa
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Klingspor solutions for the wood trade and furniture industry<br />
Stationary sanding<br />
Belt joints<br />
Klingspor offers belts with a variety of belt joints. The belt joint you require will depend on<br />
the use case and the machine. The images below show the most common types of belt joints.<br />
Paper backing<br />
Cloth backing<br />
Wide belt sander<br />
Form 1<br />
Cut with a bevel and bonded<br />
with an overlap.<br />
Form 4 G<br />
Cut with a bevel. Butt joint supported<br />
with a piece of fabric-reinforced tape<br />
bonded underneath. Ideal for use under<br />
heavy load.<br />
Long belt sander<br />
Form 2<br />
Cut with a bevel, bonded with an<br />
overlap. Grain points ground down<br />
to achieve smoother belt operation.<br />
Form 4 G<br />
Cut with a bevel. Butt joint supported<br />
with a piece of fabric-reinforced tape<br />
bonded underneath. Ideal for use<br />
under heavy load.<br />
Edge sander<br />
Form 5<br />
Cut with a bevel, bonded with an<br />
overlap. Grain zone ground down<br />
completely. Preferred joint for<br />
wood sanding with planar contact<br />
elements.<br />
Form 5<br />
Cut with a bevel, bonded with an<br />
overlap. Grain zone ground down<br />
completely. Preferred joint for<br />
wood sanding with planar contact<br />
elements.<br />
14
Change language