Arrowhead Forensics 2020 Catalogue

SNOW IMPRESSION WAX
This spray wax forms a layer over the snow to give support and retard melting. Impression
evidence found in snow or ice presents a unique set of difficulties for recovery. Due to the fact
that most gypsum-based casting materials generate heat during the curing process, it is
necessary to provide an insulating medium. Spray Snow Impression Wax into the impression to
prepare the surface for casting. This locks the impression detail to avoid melting when the casting
medium is applied. It is supplied in a 15 oz. (425g) aerosol can.
A-5010 .............................................................................................................................................................................................................$22.65
CRIME SCENE TOOLS
Identify impression at scene
Spray 2 coats of wax from 10"-12". Then
spray 4-6 coats from 6". Allow 1-2 minutes
drying between coats.
Pour casting material into impression
SNOW PRINT POWDER
Snow Print Powder is designed to provide contrast for capturing the details of shoe and tire
track impressions in cold, frozen or partially melted snow coverage. The slightly transparent
impression in snow will not sufficiently reflect the light from the camera flash to adequately
show detail. Snow Print Powder will help visualize the mark and provide surface contrast
for the proper photography. Snow Print Powder is applied to the track with a soft fiberglass
brush. A light dusting is all that is needed to apply this special formulation of powder to the
mark.
A-5014 250 ml ...................................................................................................................................................................................$27.50
Identify impression at scene.
Lightly dust Snow Print Powder on
impression with fiber brush.
Photograph for records
SNOW PRINT PLASTER
Snow Print Plaster is a specialized casting material for use in fragile snow impressions.
The dry powder is initially sifted over the snow impression to form a base
layer. The remaining powder is mixed quickly with water and immediately applied to
the impression. Includes three 1.75 lb. bags
A-5034 White 1.75 lb 3/pk ....................................................................................................................$45.00
CONTACT AUSTRALIAN DISTRIBUTORS, TEL: TACTICAL 800.953.3274 GEAR DISTRIBUTORS: WEB: Email: arrowheadforensics.com sales@tacticalgeardistributors.com.au E-MAIL: • Phone: sales@arrowheadforensics.com 1300 896 001 • Website: www.tacticalgear.com.au 183