Arrowhead Forensics 2020 Catalogue

PHOTODOCUMENTATION
ADVANCED LASER TRAJECTORY FINDER KIT
KIT CONTENTS
1) Digital Angle Finder
1) Digital Protractor
1) Angle Bracket
1) Protractor Laser Mount
1) Sunpak Model Tripod
1) Tripod Adapter
1) Tripod Extension Rod
2) Mounting Magnets
1) Counter balance bottle, 32 oz.
1)Trajectory Rod Set
- 4 Penetrating
- 4 Photography
1) Elastic Stringing Kit
8) Centering Cones
8) Centering Grommets
4) Threading Tips
1) Red Laser 5mW
1) Green Laser 20mW
1) Acrylic Photo Card
20) Orange Acrylic Evidence Markers
20) Yellow Acrylic Evidence Markers
20) Adhesive White Plastic Clips
50) Reusable Wax Dots
Short Plastic Photo Numbers (1-15)
10) Vinyl Photo Evidence Scale, Gray,
4) Photo ID Markers, Blank w/scale sheets
11) Label Circles, A-D, 0-9, 4 sheets
1) Steel Tape Measure, Manual
(100ft./30m)
1) Marker Sharpie Fine Point Black
1) 5.11 RUSH 24 Backpack
Whenever a firearm is discharged, it leaves evidence behind including cartridges, gunshot residue, and physical artifacts where
the projectile passes through or embeds itself in surrounding objects. Trajectory analysis uses these artifacts to reconstruct,
through observation and measurement, how a shooting most likely occurred, and determine the originating location of the
shooter. The new Advanced Laser Trajectory Finder Kit incorporates advances in lasers and digital measurement to provide the
officer with the most accurate measurement and tools available today. This kit allows a single investigator to do a detailed ballistics
or shooting reconstruction. This kit includes four anodized aluminum penetrating rods, centering cones, and grommets.
These are placed in holes created by the projectiles, allowing the investigator to photograph the trajectory, measure the various
angles of entry, and also attach strings or lasers to further reconstruct the path of the bullet. In addition, there are four more
rods that can be used to extend the penetration rods, which allows the rods to be passed through hard-to-string areas, such as
car seats. The centering cones are held in place by rubber grommets, which are easy to install and much harder to lose than the
small o-rings typically found in these kits. This kit contains two digital angle finders, an adapter that can be placed directly on
penetration rods to determine the angle of trajectory, and a digital protractor that measures any angle by simply placing the bottom
edge at the measurement point, and opening the other leg to the point of measurement. The digital read out is accurate to 0.2 degrees.
Finally, for documenting the trajectory path beyond the rods, the kit provides two methods, stringing and laser trajectory. For stringing,
this kit includes elastic string, which when tightened does not sag like conventional string. Included are 6 spools (2 bright yellow,
2 bright orange, 1 neon green, and 1 highly reflective silver). For laser trajectory, this kit contains two lasers, a red laser and a new 15mw
green laser. The lasers can be attached to the trajectory rods or placed on an included tripod mount to project the path of the bullet.
The kit also includes marking cones and triangles for identifying shell casings or other evidence locations, adhesive decals printed
with a 2 cm scale and a blank space for custom manual labeling of bullet holes, a tape measure, and reusable dots and clips that can
be used to attach markers and string to any smooth surface. This kit is contained in an easy to carry and easy to deploy 5.11 Tactical
Rush 24 backpack, and contains everything needed to execute a sound ballistics or shooting reconstruction.
A-6926A ...............................................................................................................................................................................................................................................................................................$739.90
LASER TRAJECTORY KIT
Laser projection is an accurate method used to assist in determining
projectile trajectories at crime scenes. When attached
to a penetration rod which has been inserted into a bullet hole,
the laser beam can help determine the direction and angle of the
source or direction and angle of the projectile exit and possible
impact sites. The laser projection pointer is a class 111a laser
diode with an output of 5mW at 620nm. It is powered by two AAA
batteries and weighs 1.4oz.
KIT CONTENTS
1) Ballistic Angle Finder
2) Stringing Tips
1) Ballistic Laser Class 111A
4) Centering Cones
4) O-rings
4) Bullet Penetration Rods
1) Universal Tripod Mount
6) Multi-colored Photographic Rods
1) Roll of Colored Trajectory String, 250ft
2) Rod Connectors
2) Bullet Tips
Case w/ Custom Foam Liner
A-6926 Laser Trajectory Kit ...................................................... $495.80
242
CONTACT TEL: 800.953.3274 AUSTRALIAN DISTRIBUTORS, WEB: arrowheadforensics.com TACTICAL GEAR DISTRIBUTORS: E-MAIL: Email: sales@tacticalgeardistributors.com.au sales@arrowheadforensics.com
• Phone: 1300 896 001 • Website: www.tacticalgear.com.au