c-2900-26

External tools
GENERAL TURNING
A
ENG
T-Max® shank tool for turning
Rigid clamp design for ceramic inserts
CCBNR/L
CCLNR/L
KAPR 75.0° 95.0°
B
C
Dimensions, mm
CZC MS OHX Ordering code B H LF WF HF MIID
12 25 x 25 34.6 CCBNR/L 2525M 12-4 25.0 25.0 150.0 22.0 25.0 3.0 0.42 CNGN 12 07 08
32 x 25 34.6 CCBNR/L 3225P 12-4 25.0 32.0 170.0 22.0 32.0 3.0 1.02 CNGN 12 07 08
D
12 25 x 25 32.0 CCLNR/L 2525M 12-4 25.0 25.0 150.0 32.0 25.0 3.0 0.79 CNGN 12 07 08
32 x 25 32.0 CCLNR/L 3225P 12-4 25.0 32.0 170.0 32.0 32.0 3.0 1.12 CNGN 12 07 08
16 32 x 32 39.0 CCLNR/L 3232P 16-4 32.0 32.0 170.0 40.0 32.0 6.4 1.14 CNGN 16 07 12
When using inserts with thickness 4.76 mm optional shims must be ordered.
Spare parts
R = Right hand, L = Left hand
E
CZC MS Shim Shim screw Clamp set
12 25 x 25-32 x 25 5322 234-02 5513 020-02 5412 034-021
16 32 x 32 5322 234-04 5513 020-07 5412 034-031
For complete list of spare parts, see www.sandvik.coromant.com
F
G
A243 F2 E1 H36 H10
H
GENERAL TURNING External tools
A 251