c-2900-26

Machine side interface Coromant Capto®
TURNING TOOL ADAPTORS
A
ENG
Coromant Capto® reduction adaptor
Short version, for segment clamping only
DSGN 2 7
B
Dimensions, mm
C
CZC MS CZC WS CNSC CXSC DSGN Ordering code DCON MS DCON WS LF LB 1 LB 2 LB 3 BD 2 BD 3 BHTA 2
C5 C3 3 1 2 C5-391.02-32 033A 50.0 32.0 33.0 5.0 33.0 50.0 0° 80 45.00 0.54
C4 3 1 2 C5-391.02-40 040A 50.0 40.0 40.0 15.0 40.0 50.0 0° 80 55.00 0.59
C6 C3 3 1 2 C6-391.02-32 032 63.0 32.0 32.0 6.0 32.0 63.0 0° 80 45.00 0.91
C4 3 1 2 C6-391.02-40 040 63.0 40.0 40.0 11.0 40.0 63.0 0° 80 55.00 0.98
C5 3 1 2 C6-391.02-50 050A 63.0 50.0 50.0 20.0 50.0 63.0 0° 80 95.00 1.11
C8 C5 3 1 2 C8-391.02-50 045A 80.0 50.0 45.0 5.0 45.0 80.0 0° 80 95.00 2.00
C6 3 1 2 C8-391.02-63 055A 80.0 63.0 55.0 15.0 55.0 80.0 0° 80 170.00 2.15
C10 C6 3 1 7 C10-391.02-63 055 100.0 63.0 55.0 14.0 19.0 55.0 63.0 100.0 75° 80 170.00 3.70
C8 3 1 7 C10-391.02-80 065 100.0 80.0 65.0 25.4 29.0 65.0 80.0 100.0 70° 80 170.00 3.92
D
Polygon 180 degrees rotated
Dimensions, mm
CZC MS CZC WS CNSC CXSC DSGN Ordering code DCON MS DCON WS LF LB 1
C8 C6 3 1 2 C8-391.02R-63 055A 80.0 63.0 55.0 15.0 80 170.00 2.13
For spare parts, visit www.sandvik.coromant.com
Note!
E
Not possible to use together with basic holders using centre bolt clamping.
F
G
G1 H36 H35 H5
H
TURNING TOOL ADAPTORS Machine side interface Coromant Capto®
F 5