c-2900-26

Feed recommendations and geometry descriptions
PARTING AND GROOVING
A
ENG
Cutting data recommendations for CoroCut® 1-2
Profiling
Radial feed
Insert width (CW), mm
Axial feed
Cutting depth (a p) mm
Allround geometry for profiling with low
chip thickness in most materials.
Periphery ground with sharp cutting
edge.
B
123-RS
Feed (f n) mm/r
Feed (f n) mm/r
C
123-RE
Radial feed
Insert width (CW), mm
Axial feed
Cutting depth (a p), mm
Alternative for finish profiling of
hardened materials
Gives outstanding productivity and
exceptional surface finish.
Available as CoroCut 1- edged inserts.
D
Cubic boron nitride
tipped
Feed (f n), mm/r
Feed (f n), mm/r
123-RS
Radial feed
Insert width (CW), mm
Axial feed
Cutting depth (a p), mm
Alternative for finish profiling of nonferrous
materials.
Gives outstanding productivity and
exceptional surface finish.
For use under stable conditions.
Available as CoroCut 1-edged inserts.
E
Diamond tipped
Feed (f n), mm/r
F
Feed (f n), mm/r
Aluminium profiling
Radial feed
Insert width (CW), mm
Axial feed
Cutting depth (a p), mm
First choice for profiling in non-ferrous
materials.
Good chip flow giving good surface
finish.
Sharp cutting edge.
Available as CoroCut 2-edge inserts.
G
123-AM
Feed (f n), mm/r
= Recommended starting value.
For cutting speed recommendations, see page B130
Feed (f n), mm/r
H
PARTING AND GROOVING Feed recommendations and geometry descriptions
B 141