c-2900-26

A
GENERAL INFORMATION
Code keys
CoroCut® XS
Insert for parting
ENG
B
Insert for turning/grooving
Insert for threading
C
D
Shank holder
1 Family description 2 Insert clearance angle 3 Type of operation
C=Cut off/parting
M = A = 50° G = Grooving
T=Threading
F=Turning
B=Back turning
X = Semi-finishing blanks
4 Hand of insert/holder 5 Insert seat size 6 Insert thickness/corner radius, mm
R = Right hand 3 For parting insert width (CW) 070 =
L = Left hand
0.70 mm
E
For back turning insert corner radius
(RE) 005 = 0.05 mm
7 For cut off inserts 8 For threading inserts 9 For threading inserts
(C in third position) (T in third position) Hand of thread point
N = Neutral with geometry 60 = V-profile 60° N = Neutral
T = Neutral without geometry
L = Left handed with geometry
A = Right hand
C = Left hand
F
R = Right handed with geometry
10 Clamping system 11 Holder style 12 Shank dimensions
S = Screw clamping AL = 90° ex. 1010 = 10 x 10
G
13 Shank tool length, mm 14 Additional information
K : LF = 125 mm X = Special designed for working with sub-spindle
H
GENERAL INFORMATION Code keys
H 24