c-2900-26

External tools
GENERAL TURNING
A
ENG
T-Max® cutting unit for turning
Rigid clamp design for ceramic inserts
Coromant Capto® - Internal coolant supply
KAPR 45.0°
B
C
Dimensions, mm
CZC MS DMIN 1 DMIN 2 CNSC Ordering code DCON MS LPR LF WF MIID
12 C5 110.0 165.0 3 C5-CSSNR/L-35052-12-4 50.0 60.3 52.0 35.0 10 3.9 0.69 SNGN 12 07 08
C6 110.0 190.0 3 C6-CSSNR/L-45056-12-4 63.0 64.3 56.0 45.0 10 3.9 1.12 SNGN 12 07 08
15 C5 125.0 165.0 3 C5-CSSNR/L-35050-15-4 50.0 60.2 50.0 35.0 10 6.4 0.71 SNGN 15 07 12
C6 125.0 190.0 3 C6-CSSNL-45054-15-4 63.0 64.2 54.0 45.0 10 6.4 1.14 SNGN 15 07 12
D
When using inserts with thickness 4.76 mm optional shims must be ordered.
R = Right hand, L = Left hand
Spare parts
CZC MS Shim Shim screw Clamp set Nozzle
12 C5 5322 425-02 5513 020-02 5412 034-021 5691 029-01
12 C6 5322 425-02 5513 020-02 5412 034-021 5691 045-01
15 C5 5322 425-05 5513 020-07 5412 034-031 5691 029-01
15 C6 5322 425-05 5513 020-07 5412 034-031 5691 045-01
For complete list of spare parts, see www.sandvik.coromant.com
E
F
G
A243 F2 E1 G1 H36 H10 H5
H
GENERAL TURNING External tools
A 267