CP7372 - OE 80 - SF

122
GENERAL INFORMATION
APPLICATIONS.
- Rally.
Clutch - Race
CP6092.
Ø140mm, 2 Plate Paddle / Cerametallic.
FEATURES.
- 2 Plate.
- Push type.
- Flat fl ywheel fi xing.
- outer diameter location.
- One piece cover and lugs.
- machined from billet. Provides rigidity and strength and
cooler running, allows dust and debris to escape.
- Heavy duty.
- 3 paddle sintered driven plates.
- Black hard anodised.
- Stainless steel wear plates.
- Low wear rate.
- Individually tested.
- match machined, balanced and clutch load and function.
- CP4702 mounting studs available.
- Replaces CP5682 series.
PART NUMBERS.
CP6092ACRV.
CP6092AORA.
Note: Full Installation Drawing available at
www.apracing,com
INSTALLATION DRAWING
MOUNTING HOLES
8 HOLES Ø8.15/8.05
EQUISPACED ON A Ø154.45 P.C.
MIN C/BORE Ø17.22
THE CLUTCH SPIGOT IS DESIGNED TO BE
THIS DIAMETER WHEN BOLTED TO THE
FLYWHEEL. BEFORE FITTING ( WITH THE
INSTALLATION WIRE IN PLACE) THIS DIAMETER
MAY BE SLIGHTLY REDUCED.
VIEW OF FLYWHEEL
SPIGOT SEE PAGE ???
TECHNICAL SPECIFICATIONS
Torque CP6092ACRV 504Nm (372lb/ft)
Capacity. CP6092AORA 371Nm (274lb/ft)
Release Loads. Max peak worn. At travel.
CP6092ACRV 450daN 300daN
CP6092AORA 375daN
Set-up Height. (New)
250daN
CP6092ACRV 39.37mm / 37.91mm
CP6092AORA 39.11mm / 37.65mm
Set-up Height. (Worn)
CP6092ACRV 42.01mm
CP6092AORA 41.75mm
Clutch “Wear In”. 1.00mm
Weight. (including driven plates) 3.3Kg
Complete Assy Inertia. 0.01155Kgm²
Driven Plate & Hub Interia. 0.00180Kgm²
Release Outer race rotates CP3457-1 or -9
Bearing. Inner race rotates
DRIVEN PLATES.
CP3457-11
Thickness. New = 6.25mm Worn = 5.71mm
D/Plate Types. Part Number. Spline Details.
CP4581-4 x 2 1.00” x 23
Back to Back.
CP4581-5 x 2
CP4581-3 x 2
7/8” x 20
1.16” x 26
CP4581-6 x 2 29.0mm x 10
Other splines available see page 113.
Note: Clutch supplied less driven plates. Order Separately.
SPARE PARTS.
Cover
CP6092ACRV CP6092-8ACRV
Assemblies. CP6092AORA CP6092-8AORA
Wear Clips. CP4073-123
Main Pressure Plate. CP4074-104
Intermdiate Pressure Plates. CP6092-102
SECTIOM B-B
NOTE B
INSTALLATION WIRE FOR USE WHEN
INSTALLING CLUTCH, TO ENSURE EASY
FITMENT OF COVER. THIS WIRE MUST BE
REMOVED BEFORE USE.
RECOMMENDED
CLUTCH FIXING
STUC Cp4702 AND K-LOCK NUT
TIGHTENING TORQUE
22.0Nm (16lb/ft)
R1.75 MAX
SEE
NOTE A
NOTE A
RELEASE TRAVEL TO BE
LIMITED TO 3.8MM MAX
SEE NOTE B
www.apracing.com +44 (0)24 7663 9595
#Ø166.07/166.03
165.98/165.93
Ø87.00
DIM’N ‘A’
26.62
MAX
1.90
MIN
Ø140mm Clutch
S.U.H. FULLY WORN
1.00 WEAR IN
S.U.H. NEW
42.15/40.89
49.15 MAX
52.72 MAX
Ø46.20 MIN
Ø50.00
RELEASE FULCRUM
Ø71.75 MIN
Ø92.96 P.C.
Ø168.25 MAX