CP7372 - OE 80 - SF

124
Clutch - Race
CP7371.
Ø184mm Single Plate Sintered.
GENERAL INFORMATION
APPLICATIONS.
- Race.
FEATURES.
- Single Plate.
- Push type.
- Stepped fl ywheel fi xing.
- inner diameter location.
- One piece cover and lugs.
- machined from aluminium alloy.
- For high torque applications use CP4429 sintered plate.
- for other applications use CP2012 sintered plate.
- Black hard anodised cover.
- Stainless steel wear plates.
- Low wear rate.
- Individually tested.
- match machined, balanced and clutch load and function.
- CP4702 mounting studs available.
PART NUMBERS.
CP7371-CE90-SF
CP7371-OE90-SF
CP7371-NE90-SF
Note: Full Installation Drawing available at
www.apracing,com
INSTALLATION DRAWING
MOUNTING HOLES
6 HOLES Ø8.15/8.05
EQUISPACED ON A 200.25 P.C.
MIN C/BORE Ø17.0
NOTE A
RELEASE TRAVEL TO BE LIMITED
TO 5.50MM MAXIMUM BY MEANS
OF AN EXTERNAL STOP
# R0.75
MAXIMUM
#
2.54
2.46
Torque
Capacity.
TECHNICAL SPECIFICATIONS
CP7371-CE90-SF 475Nm (350lb/ft)
CP7371-OE90-SF 312Nm (230lb/ft)
CP7371-NE90-SF 219Nm (161lb/ft)
Release Loads. Max peak worn.
CP7371-CE90-SF 347daN
CP7371-OE90-SF 222daN
CP7371-NE90-SF 154daN
Set-up Height. (New)
CP7371-CE90-SF 23.86mm / 21.52mm
CP7371-OE90-SF 24.61mm / 22.24mm
CP7371-NE90-SF 24.14mm / 21.81mm
Set-up Height. (Worn)
CP7371-CE90-SF 26.88mm
CP7371-OE90-SF 27.63mm
CP7371-NE90-SF 27.15mm
Clutch “Wear In”. 0.75mm
Weight. (including driven plates) 2.7Kg
Complete Assy Inertia. 0.0115Kgm²
Driven Plate & Hub Interia. 0.0018Kgm²
Release
Bearing.
Outer race rotates CP3457-2 or -10
Inner race rotates CP3457-6
DRIVEN PLATES.
Thickness. New = 2.63mm Worn = 1.88m
D/Plate Types. Part Number. Spline Details.
Sintered.
CP2012-165FM3 x 1
CP2012-166FM3 x 1
1.00” x 23
7/8” x 20
Sintered Paddle.
CP4429-4FM3 x 1
CP4429-3FM3 x 1
1.00” x 23
7/8” x 20
Other splines available see page 113.
Note: Clutch supplied less driven plates. Order Separately.
SPARE PARTS.
Cover CP7371-CE90-SF CP7371-6ACRV
Assemblies. CP7371-OE90-SF CP7371-6AORA
CP7371-NE90-SF CP7371-6AGRN
Wear Clips. CP3911-102
Main Pressure Plate. CP3021-101
SET UP HEIGHT NEW
SEE SPECS ABOVE
SET UP HEIGHT WORN
SEE SPECS ABOVE
(0.75mm WEAR IN)
DIRECTION OF
RELEASE TRAVEL
www.apracing.com +44 (0)24 7663 9595
# Ø186.868 / 186.832
Ø131.60
Ø184mm Clutch
0.30
MAXIMUM
WORN
A - A
BACK TO BACKP
RIVEN PLATES
24.40
22.70
SEE NOTE A
Ø45.95
MINIMUM
31.45
MAXIMUM
RECOMMENDED CLUTCH MOUNTING
CP4702 STUD AND K-LOCK NUT
TIGHTENING TORQUE 22.0Nm (16lb/ft)
Ø54.00
RELEASE BEARING
DIAMETER
Ø213.1
MAXIMUM